A blouse with a shuttlecock on the shoulders is again in fashion. Lush decor and will be the highlight in the image of girls, which will attract the attention of everyone around them. Designers model the blouse as you like. This may be a blouse with a shuttlecock, which is sewn in the center of the shelf.
A blouse with a shuttlecock on shoulders looks very sexy and seductive. You can sew a belt to the product. In this case, cutting is acceptable combination of parts from 2 fabrics: a belt and a shuttlecock - contrast fabric, a shelf, a back and a sleeve - the main fabric.
Which material to choose?
In the store you can buy a cut of silk, chiffon, satin, cotton, flax. Each fabric is amazing for its properties and appearance.
Atlas will make the model elegant and delightful. It is not hot in the summer and warm in the cool. Flowing silk and chiffon drape easily and give the future product an equally stunning look.
Silk Crumbles quickly: it needs to be processed on the overlock.
Cotton flax have good hygroscopicity. Cotton is prone to shrinkage during washing, so a piece of fabric should be taken in view of this shortcoming. The fabric is chosen any color and pattern.
Sew open model with shuttlecock
How to sew a beautiful addition to shorts or jeans? To sew a blouse take ready-made pattern.
The pattern looks like this. The length of the blouse can be taken at your discretion. As you can see in the drawing patterns, everything is quite simple. Building patterns and cutting resembles the lessons of mathematics and works.
The following stages of manufacturing the product:
- Sew the sides of the product, leaving room for the armhole. Open the side sections with a zigzag stitch.
- Two armholes must be closed in one of the following ways: it may be a piping, an oblique backing or a special processing seam that is present on the sewing machine.
- Bias slice cut out of the same materialfrom which the product is sewn. Its width is 3 cm, length - measurement of 2 armholes. Cut out the tape should be at an angle of 45 degrees. You can still buy it in the store.
It is important that it should be as close as possible to the color to the product. This will help avoid problems with molting fabric during washing. The product will be beautiful and without staining after repeated washings.
Next steps:
- Piping is drawn on the armhole and sewn inside the product. The width of the facing is 3 cm. On the inside of the blouse, the facing can be sewn with hidden stitches.
- Next you need to prepare a shuttlecock. Hem the bottom side of the decorative element on the machine with a seam in the hem with a closed cut. On the second side, lay two parallel lines (without bartack) with the widest stitch on the machine. Volan prisborit the width of the top of the blouse. Why do we need such preparation of the finish? In the finished form, it will have a beautiful lush assembly.
- Fleece to sweep a blouse to the top and stitch. The wrong side of the part must lie on the front side of the product.
Final sewing operations will be:
- Cut a 3-5 cm wide bar. The width of the slats to fit the width of the gum. The length is equal to the length of the top of the blouse.
- First of all on the bar you need make a slit for the gum. It can be processed on a sewing machine with a special foot for making loops. Cut the finished cut manicure scissors or sealer.
- The bar folds double and is taken to the product. Plank sew on the car. Insert the gum into the bar and adjust its length.
- Hem down products.
Modeling blouses without sleeves
The shuttlecock on the blouse is so beautiful that they can decorate the blouse as they please. For example, sew a shuttlecock along an oblique line along the entire length of the shirt. The decorative element captures the two parts of the shelf. In the photo you can see that it will be a classic office shirt with a turn-down collar without sleeves.
On the pattern of the finished shirt you need to make some changes:
- Need to deepen the armhole.
- On the sides of the back and shelves from the bottom edge down retreat 1.5-2 cm and draw a new armhole. Open the shirts a little change. Shelf need to carve out without a cut along the fastener line.
- Button closure should be performed on the strap.
Let's build a shuttlecock. The decor has beautiful tails. It must be carved out in a spiral. The part may have different widths. It all depends on the desire of the hostess blouse. Here it is recommended to first cut it out on paper, cut it out and attach it to the future product.
The more often a product is tried on at a certain stage of sewing, the better. The finished product will be free of defects. An example for building a shuttlecock is the following photo.
Model with sleeves
On the basis of the pattern of a blouse without a collar, you can sew a blouse with a shuttlecock on the shoulder.
Pattern changes will be as follows:
- The length of the shoulder is divided into two equal segments.
- On the line that passes through the bottom edge of the armhole to postpone the following segments - 15 cm, 11 cm.
- The points obtained are connected by a line.
- Cut the shelf along the line.
The shuttle is sewn into one seam when assembling the shelves.
Straight flounced blouse
Another design idea. The basis of the pattern is a blouse with a short sleeve without a collar. Around the middle of the armhole to hold a horizontal line to the middle of the shelf. Ready shuttlecock will be held at the chest and mid-length sleeves.
This is a continuation of the previously proposed blouse.
The second version of clothing is suitable for creating unmatched images for work, a date or a solemn reception. Beautiful decor will give charm to the image.
There are several ways to model the above blouse.
For the pattern of a blouse with a flounce sleeveless you can build a drawing of the sleeve (the pattern is taken above the blouse).
The drawing will require 2 measurements:
- The length of the sleeve. Apply a measuring tape of tape to the shoulder, then the tape goes down to the brush level.
- Armhole Length Merk need to remove shelves from the drawing.
- Sleeve length It is equal to the half-grip of the hand. But! It is necessary to add to this length the length of the free entry of the hand. All these measurements can be taken at your discretion, taking into account the insertion of a rubber band on the edge of the sleeve.
The drawing should look like this (see photo below). In appearance, the sleeve pattern resembles a half trapezoid. Cutting sleeves occurs in the middle of the selected material.
To carve a blouse with sleeves, you need to know your size. Find ready-made patterns in fashion magazines and stitch them, following general guidelines. An example of a blouse with flounce pattern is shown in the photo.
Blouse style with flounce - an interesting idea for girls with a slim waist. If girls exactly follow our instructions, then by the summer you can surprise all your friends with a chic new clothes. A blouse with sleeves is an option for cool weather.
In the piggy bank needlewomen another master class in sewing blouses with a shuttlecock on his shoulders.
