How to choose a sheepskin coat?

Sheepskin coat - the most common type of winter clothing among women. A quality product provides warmth and comfort to its owner, and does not get wet, and serves at least 3 seasons. But, unfortunately, not every sheepskin has the listed properties, because on sale is not uncommon outerwear of poor quality. In order not to purchase a poor quality sheepskin by mistake, it is important to know how to choose it and check its characteristics.

Sheepskin coats are presented in a huge range, and this concerns not only their appearance, but also quality. Previously, there was no doubt about the reliability of sheepskin outerwear, because It was made in accordance with strict state standards. But today, going for the purchase of new clothes, you have to rely only on their own knowledge and insight.

In order not to be deceived, and to get a good sheepskin coat, you need to know how to determine its quality, and the following tips will help with this:

1. The outer surface of the product, called the fur velor, should have a soft, uniform pile.
2. The front side must have a “graphical” effect, i.e. after holding your finger on the surface there will be a distinct mark.
3. It is necessary to inspect the material for scratches, fatty deposits, pock marks, salt spots, as well as traces of glue or paint. If any have been noticed - the product is not worth buying.
4. In the presence of a water-repellent coating, the surface of the sheepskin should not be sticky, heterogeneous and rough. In addition, this aspect can be checked before purchase, i.e. try to wet a small area of ​​the product.
5. All edges and corners of the pockets should be carefully machined and secured.
6. The presence of curved lines, gaps, trapped nap and folds indicates a low quality of outerwear. In addition, all seams should be double.
7. Good material after compression is quickly leveled and there are no wrinkles on it, therefore it is recommended to knead the product with your hands.
8. There should not be an unpleasant smell, which indicates unnatural or poor quality of raw materials, as well as its staining.
9. After shaking the product or lightly tingling the fur, a small amount of lint can be pulled out, but if there is a lot of it, the fur is not of high quality.

Choosing winter outerwear you need to pay attention to the label, where the manufacturer usually indicates all the necessary information about the product: composition, origin, conditions of cleaning and operation. In addition, the seller must produce a certificate of product quality at the request of consumers.

Often, girls buy a sheepskin coat, looking at their appearance, and do not even think about whether she can warm in a bitter cold. The most popular products from foreign manufacturers, because they have a more interesting design, colors, and weigh less, so they are more comfortable to wear. While sheepskin coats sewn in Russian factories are quite dense, heavy and, in appearance, monotonous. Such a difference between the seemingly identical type of outerwear lies in the production technology. If domestic companies carry out a small processing of hides, in order to preserve their density and thickness of wool, then foreign companies are trying to improve the raw material, making it more pliable for sewing, by thinning and cutting.

To choose a warm sheepskin coat, you must first turn on the fur - it must be thick and uniform. Sheep skins of Turkish and Russian origin are considered the best raw materials, since they retain their heat well even at extremely low temperatures, and are able to last for several years. Of the disadvantages can only be noted a lot of weight.

Among European products, sheepskin coats of Tuscan lamb deserve special attention. Their cost is slightly higher than the price of domestic products, but they have a more interesting design, and excellent heat-saving properties, which are provided by the long and thick pile. Having bought clothes from Tuscany, it is important to regularly comb the fur, otherwise it will soon pile up and lose its aesthetics.

1. Lack of creases and folds. Often, sellers say that the folds will be smoothed out during wear, but this is not true, because good things do not wrinkle at all, even after a long stay in a compressed state.
2. Water-repellent effect. Drops of water should simply roll off the surface of the sheepskin coat and not be absorbed. If the seller refuses to conduct such an experiment, it means that he hides the true quality of the goods.
3. Uniform staining. Examining the product in daylight, should not notice on the surface of light or dark areas. Skin cuts also need to be carefully examined - they should be evenly dyed to the fur itself.
4. Paint quality. To make sure that the sheepskin coat is not shedding, you need to rub a small portion of it with a wet, white handkerchief or piece of cloth. After the manipulation of the fabric should not be painted.
5. The quality of fur. The direction of the pile should be exclusively upwards along the entire wrong side of the product. In addition, its length, thickness and color should be the same.

After visual inspection of outerwear, it should be tried on. Sheepskin coat should “sit” slightly free, so that it does not hold down movements, and under it you can wear a warm sweater. To test comfort, it is recommended to walk around the store, raise your arms, bend over, etc. In addition, during the movements one should listen to the sounds that the material makes - they should not rustle or crack.

• The seller is obliged to produce certificates of quality and product compliance with hygiene standards at the request of the buyer. If he refuses - do not purchase any product in this outlet.
• On each factory product there is a tag and marking indicating full information about the manufacturer, the material and how to care for it. Lack of comprehensive data should alert the buyer.
• You should not choose a sheepskin coat with white fur, because it will soon darken, and will not look aesthetically pleasing. Ideally, its color should be as close as possible to the face of the skin.
• A product made of large parts of raw materials will be better and more durable.

To get a really good sheepskin coat that will meet all quality standards, it is strongly recommended to contact a specialized store.and not on the clothing market. Of course, prices may vary slightly, but in this case it will be possible to obtain all the necessary certificates, as well as information about the manufacturer, which will exclude a fake.