Spectacular turnovers on jeans

Making clothes stylish without needles was easy thanks to the doorways.

Turns on shirts, jackets and jeans talk about your good taste and awareness of the latest innovations in the fashion world. There are a number of instructions and rules on how to properly make the turns on jeans in accordance with the type of jeans, on the models of shoes, on the height and width of the turn. Let's figure it out in order.

So, where did the fashion for the rolled up jeans come from? Modern designers are increasingly returning to the fashion of the 80s of the 20th century, when the trend was to walk in oversized sweaters, tucked jeans and sneakers. There are a few ideas from where came jeans with a turnout.

One of the first is skaters. They tucked jeans for practical purposes - so that the trousers did not interfere with pushing off and riding a skateboard.

The second version of the transition podvotrotov in the world of fashion - it's American youth subcultures - punks and rockers, who were popular in the 80s.

This question has not been resolved so far, and we can choose any of the versions convenient for us of the appearance of the gateways as a mass fashionable phenomenon.

Of course, this is not a one hundred percent return to the past, but a rethinking of what has already happened. One thing is for sure - fashion is cyclical. All that has been forgotten is returned in a slightly different interpretation.

Make a stylish gate is an art. For example, for dense fabrics, one turn is enough for the fabric to lie beautifully and show the beauty of your ankles.

There are three main types of anchors, it is: narrow, wide and medium. What is the difference and how to make them right, read further in our article.

A narrow gate about 3 centimeters is more suitable for short and straight jeans to create an informal bow.

1. Wrap the bottom (bottom) of the leg once. You will turn about 1.5 cm.
2. Tuck in the resulting support again. So your leg is shortened by about 3 cm.
3. Stretch the leg along the main seams, so you secure the gate.
4. Do step 1-3 with the other leg.

Such a turnout is tight at the expense of the base-seam. Now your leg is at or above the ankle.

For this turn, choose tight jeans, so as not to create additional volume to your bow.

• Set aside from the leg edge about 3 centimeters.
• Tighten the leg to this width.
• Smooth the lapel with your hand to shape it and tuck it again to the same width. Middle alley ready.
• Do steps 1-3 with the second leg in the same way.

The average width of the turnout is about 3-4 cm, most often it is made on models by a boyfriend and / or gelfrend.

In most cases, used for long pants. Best suited for models "pipe", "mom-jeans". Also suitable for narrow models.

1. Add 4-5 cm to the seam at the bottom of the leg.
2. Tuck the pant leg to this length. If the fabric is very dense, it is better to make a single wide turn.
3. Check that the seam is flat and does not roll into the roller. If necessary, and appropriate fabric tuck the leg again.
4. For the second leg, follow steps 1-3 in the same sequence.
5. Smoothen iron the resulting turns to maintain shape.

So, you have a turnout width of about 5-6 cm. Straight wide jeans are not suitable for this kind of turnout, otherwise your bow will not be elegant and feminine.

So that one turn on the jeans does not unfold, smooth it with a hot iron. Do this after washing when the fabric is wet. Then a single gate will be better kept.

• Girls with the figure of "pear" should not do turns on jeans, so as not to increase their volumes.
• Ladies of short stature should also not shorten their jeans in order to avoid a visual shortening of the silhouette.
• A narrow gate will help make your figure slimmer.

To begin an experiment with your favorite jeans, let's define their model.

Turn-ups on skinny jeans are best for skinny girls. At the same time, choose shoes with heels for shoes.

It is best for skinny to choose narrow turns, so you emphasize the beauty of your ankles and at the same time do not add the volume of your lower legs.

The best option for the underside is straight jeans. Tightening straight jeans, you create a contrast, showing the elegance of the female ankles against the background of a wide leg. In addition, you can easily knuckle your trouser legs down by choosing a wide gate or a bulk gate.

If your boyfriends are torn, then choose a "sloppy" gateway. To do this, make an average gate in accordance with the instructions above, and then screw one edge of the seam outward as shown in the photo.

An important distinction of such a turn will be its width more than 5 cm. To do this, tuck the pant leg as for an average turn, repeat again so that the width is more than 5 cm. Medium-density or very heavy jeans work best for a double turn. Be careful when choosing a double backstop, as it can visually shorten the leg.

In most cases, the inner latch make for shortening jeans without scissors. It is best to make such turns on skinny jeans or other models of thin jeans. For example, stretch.

The width of the gate depends on your desire and the required length.

1. Turn the jeans inside out.
2. Make the leg pivot on the desired width.
3. Smooth down the ironing with the iron so that the leg edge is flat.
4. Do step 2 and 3 for the second leg.
5. Turn the jeans on the front side.
6. Iron the bottom of the legs with the iron again to give a smooth edge to the legs.

Jeans with backs are casual and grunge style. It is best to combine them with wide shirts, a variety of T-shirts and long sleeves. To create a more feminine look, wear a light blouse and a knit cardigan.

A jeans vest and a shirt with a small geometric print will look good.

To complete your look, choose a small bag or backpack.

• Casually twisted dots look more interesting on models of free cut.
• To determine the required width of the turn, wear jeans and look in the mirror. So you definitely decide what you want.
• In jeans, lightweight fabric should not be done volumetric footsteps, otherwise you will add a couple of extra pounds to your figure.
• In places where the dress code is observed it is better not to appear in tucked jeans, as this is a casual style.
• Flared jeans are not designed for backs, twisting flares - you'll look ridiculous.
• Jeans with turns and ballet flats are out of place, keep this in mind when deciding whether to shove something.
• Pick a solid or less bright top.
• Use a minimum of accessories.
• A wide gateway is ideal for jeans of dark colors.
• For light shades of jeans, choose the middle turnout.