We do manicure gel varnish

Alignment of the nail plate base under gel polish

Alignment of the nail plate base under gel polish

join the discussion

 
Content
  1. What it is?
  2. How to choose?
  3. How to use?
  4. Tips

In the world there are some things and phenomena that you can contemplate endlessly. Everyone knows that it is water and flame. But women of fashion can spend hours watching the bright highlights on their nails. But sometimes a surprise in the form of an uneven nail plate spoils the impression of a manicure, and the lacquer does not lie in a completely even layer. It is worth considering how to avoid a similar problem and how to deal with it.

What it is?

All nails have their own individual texture. Those girls with whom she is by nature even and without flaws do not have problems. But someone is the owner of nails with a rough surface, super fragile and sensitive. And during the manicure procedure, the marigolds are subjected to additional tests in the form of sawdust, grinding, and hardware actions, which creates an additional load on the nails. It is necessary to level the nails in order to develop their correct architecture. In addition, it will prevent such troubles as flowing of varnish, unevenness of the coating, coloring of the cuticle area.

The alignment takes place in the following two steps:

  • the first layer is a primer, designed to mask nail defects;
  • the second is the finish, thanks to the even spreading of the base, the nail takes on a natural even shape, fading away in the area of ​​growth of the cuticle; the result is a perfectly flat nail surface ready for decoration.

Alignment of the surface of the nail - this is an important stage of manicure. It has such advantages as:

  • the ability to strengthen the nails further and extend the period of the socks of the decorative coating;
  • creating a geometrically correct surface of the nail, which will give the correct direction of its growth;
  • simplicity of the procedure - it takes no more than 15 minutes, and additional funds for its implementation are not required; It is important to carry out the alignment procedure in the event that the old manicure is removed by the device, since you need to leave the base layer intact in order to further protect the nail from external influences;
  • Aesthetics - a smooth nail plate will make glossy glare of nails ideal after applying a decorative coating.

As already noted, there is no need to purchase special tools for this stage of manicure. The leveler can make the tools that every nail wizard has, namely:

  • leveling base for gel polishes;
  • firming biogel;
  • nail gels;
  • acrylic Powder.

Important! The general principle of the choice of the leveling layer is density and density. Liquid bases for gel polishes or self-leveling gels will not work, because they simply drain to the side and create additional problems.

How to choose?

The easiest way to level the nail plate is to use gel polish. This method can even beginner. First of all, you should pay attention to the bottle with the base - it should be written with the label "with rubber". Rubber makes the composition more viscous, thick and plastic. It is thanks to this rubber consistency that the indentations are filled and the tubercles on the nail are aligned, and an arch of the correct shape is formed. The advantages of this method are as follows:

  • a rubber base is usually self-leveling;
  • eliminates the natural defects of the nail;
  • application speed

There is a variant of the alignment of the nail using biogel. Its plus is that it not only levels the nail, but also treats it thanks to vitamin-mineral complexes in composition, proteins and resins. Biogel has such advantages as:

  • natural composition;
  • therapeutic effect;
  • acceleration of nail growth;
  • easy removal of the coating.

However, it is worth noting that working with biogel is difficult. The brush should not touch the working surface of the nail - the alignment should occur from the tension of the composition. When choosing a biogel in the store, carefully consider the brush - it should be soft and have long fibers.

The third option - the alignment of the nail plate gel. Here it is worth remembering that the gel can not be removed with a solvent - it can only be cut down with a manicure machine or abrasive file. The composition of the gel is relatively non-toxic and safe. It covers and strengthens the nail well, providing a smooth decorative coating and its resistance to external factors.

Finally, you can use to level the acrylic powder. Everyone knows that acrylic is used for nails. However, this material is very versatile. It is more difficult to work with it than with the above equalizers, but in the end you will definitely be happy with the result. Acrylic powder perfectly strengthens the nails, serves as a strong foundation for broken corners of the nails, allows you to ensure the durability of the coating for a long time. The choice of method and material for alignment of the nail plate is yours, but remember that you should not be too complex because of small natural nail defects.

How to use?

It is clear that the leveling layer on the nail is not the basis of manicure. Before applying it, the handles undergo a series of procedures - nail filing, removal of the cuticle, polishing, applying the main primer and only then the base layer. Self-leveling occurs in several stages.

If this is a base for gel polish, then they are as follows:

  1. First, apply a thin layer of the base on the nail and dry it for a few minutes in a special lamp;
  2. then with a brush, leave a large drop of the base in the center of the nail, and then move it to its upper point, parallel modeling the roundness and C-shaped bend;
  3. do not press the brush too hard; bending modeling is carried out with the tip of the brush;
  4. for a finishing check and a perfectly even layer, turn the nail down with a coating - gravity itself will correct micro-errors;
  5. Do not forget about the end side of the nail - process it last.

When aligning the nail with biogel, the scheme is essentially the same:

  1. first wipe the nail with a thin layer and dry it in the lamp;
  2. then spread a large drop of the gel evenly over the nail, starting from the top point and moving towards the tip; monitor the correctness of the formation of the bend of the nail - from the sides of the rollers of biogel should be less;
  3. do not forget to flip a finger for gravity leveling at the end.

When using acrylic-based powder as a leveling layer, there are some features of the work, such as:

  1. First, apply a thin layer of the base on the sawn and formed nail and dry it;
  2. then, as described above, distribute a large drop of the base, and sprinkle powder on it;
  3. after drying the nail in the lamp, remove the excess powder with a brush or brush, irregularities can be removed using a saw;
  4. acrylic coating at the end of the finish layer of the base;
  5. then you can apply a decorative coating with the selected design and top.

As you can see, it is not so difficult to carry out the procedure for aligning the nail plate. This is possible even for beginners at home with the necessary materials and lamps.

Tips

Generally, if the nails from nature have irregularities and tuberosity, then it is worth trying to find the root cause of such problems. The main sources of defects can be the following:

  • immunological diseases;
  • hormonal disorders;
  • skin diseases such as psoriasis and lichen planus;
  • weakening of the immune system, general body fatigue;
  • nail fungus;
  • injuries.

Important! If suddenly the nails become painful, brittle and thin, then it is better to contact a specialist who will understand the problem and prescribe an adequate treatment.

You can try to rectify the situation, using the people's councils. One of these techniques are baths, which have a firming and general healing effect. An example would be a bath for hands on the basis of oils: a few tablespoons of olive, castor and vegetable oils, mix and heat in a water bath. Marigold should hold in the composition of at least 20-25 minutes.

With regard to practical advice when aligning the nail plate with the help of nail tools, here the recommendations are as follows:

  • after alignment, inspect the nail from the side and from the end: you should track the correct arched bend with clear boundaries in the center of the nail;
  • check the coating not only on the eye, but also on the light: the glare on the nails should be even and clear, without any creases or refractions.

Advice on how to perform a coating with a perfect flare: you can not do without a round lamp. Gloss nail primarily depends on the light source. When using a conventional lamp, the glare can be of any shape (from square to corner). With the same round lamp it will be perfect and regular round shape. You can use the usual desk lamp, but the main thing - the form. It is enough to hold the nail under it for 15–20 seconds, and then place the fingers in the lamp to polymerize the coating.

In the race for well-groomed hands and a stylish manicure, do not forget that first of all the nails need proper care. Do not rely only on the wonders of the nail industry and the professionalism of the master. It is extremely important to eat right and varied, to carry out cosmetic medical procedures for nails (baths, masks, massage), to protect hands from aggressive environmental factors. Only then your fingers will shine with beauty and health to the very tips.

On how to align the nail plate under the gel Polish, see the following video.

Write a comment
Information provided for reference purposes. Do not self-medicate. For health, always consult a specialist.

Fashion

beauty

Relations