How to iron pants?

It is no secret that most women do not like to iron. Moreover, if you ask the ladies themselves, ironing what kind of garment makes them work the most, the overwhelming majority will agree that it is most difficult to smooth the pants, especially if they are with arrows. The funny thing about this fact is that many modern ladies often do not even know how to iron the hands even on their trousers, so that the perfect result will come out, although in reality this action is not so difficult.

In order to make the process of ironing pants as correctly as possible, You need to perform a number of preparatory manipulations:

• the ironing surface is covered with a cover or a special dense type blanket;
• it is better to choose an iron that has a steam function;
• during ironing it is recommended to cover the pants with a thin layer of gauze;
• use a liquid sprayer if necessary.

You must install on your iron that temperature mode that corresponds to the type of fabric of the pants. The necessary information is indicated on the label that is sewn on the back of the pants. Therefore you should not cut it, but it is better to save it if it does not prevent you from wearing pants. If such a tag is absent (it may fade from washing), then it is worth remembering: such types of natural fabrics as flax, cotton and wool are best ironed at elevated temperatures, but synthetic materials, on the contrary, at reduced.

When ironing, your pants will need to be turned inside out, ironing your pockets neatly, do not forget about the lining, paying attention to the belt. The back seam should also be well smoothed. All the manipulations are done carefully, since it will not be easy to smooth over incorrectly pressed trousers after. Before starting the process, carefully review your pants. They must be completely clean, because even a small smudge can be imprinted tightly into the material. The appearance of the pants will be spoiled, and it will be quite problematic to remove such a stain later.

If linen or corduroy pants are dry, just spray a little with water or steam over iron., then fold and hang on the back of the chair for half an hour. To prevent moisture from evaporating, wet pants can be folded into a bag. It is recommended to wrap the silk in a slightly wet towel, as it will be very difficult to iron the dry product made of such fabric.

Consider how to properly and as quickly as possible to stroke the classic men's pants.

• Start ironing from the top of the product.
• It is best to immediately moisten the lace (a special nozzle made of cloth), squeeze, and iron the belt with it, and also not forget about the lining and the available pockets.

• You should not press the heated iron to the product, otherwise the seams will be printed on the leg. Clothes made of cotton and linen can be safely ironed without a nozzle or gauze.
• Pants need to be ironed along the entire length, both front and back, while gently bending back all the seams, and ironing them at the end of the ironing with a little pressure. Do not forget to use the steam function.

• Next, turn the product on the front side. Pants are pulled onto the board or a special pad is placed under them.The iron will need to be rearranged frequently, as if you were stripping the cloth. Next, the trousers ironed with a turn on the ironing board around the axis, or quickly turn over on the table.
• After ironing, be sure to give the ironed product a little “rest” so that all the moisture “leaves” it and it cools down. If you want to wear the pants on yourself immediately, they can be very quickly wrinkled.

Ironing trousers may begin to shine. To avoid this, you need to iron them through soaked in water with vinegar, and after a well-wrung fabric of flax. You can not completely dry it when ironing, and then the effect of glossy will be easy to avoid.

Velveteen trousers and velvet products are very delicate things. They need to be ironed without pressure only in the course of the location of the pile, on the weight (and not on the board) or on a special pillow.

Pants made of silk ironed only from the inside, and through a completely dry material. The pants themselves should also not be wet. Flax and cotton at the same time can be wet from the heart, and immediately ironed with an iron. Remember - it is not necessary to put on or hide in the closet just ironed things, so they quickly hesitate and lose their appearance.

Place one pant leg on a special running board. Make sure that the seams from the sides coincide. Also pay attention to the back and front folds - gently swipe on them with an iron. The second leg is ironed in the same way. In order for trousers not to "sit down" after a similar ironing, they should be completely dry under a working iron, and not on a clothes hanger. During the ironing process, it is not necessary to force the iron against the fabric, it is better to try to “steam” the material.

Wool pants can be smoothly smoothed and without the help of an iron. Simply place the product on a usual terry towel or sheet, put another towel on top of it. The usual rolling pin "roll" pants, changing if necessary wet towels on the already dried. This method even has a special advantage - the wool pile will not definitely wrinkle. Then the product is simply left on the table without towels to dry.

Velvet is not worth ironing too often. With frequent ironing, the fabric will “sit down” and it will be difficult for you to correct this defect. For velveteen, it is best to choose an iron that has the function of regular steam supply. Choose for this purpose an iron with a Teflon sole, it will avoid glossy spots on the fabric. It is necessary to smooth out such a delicate fabric from the inside or you can use an iron fabric made from natural fabrics.

Velvet is recommended to be ironed only with the help of a substrate, the role of which can even play a thin blanket. If there is such an opportunity, then ideally it is worthwhile to iron pants on weight, although this is inconvenient, but the effect will be amazing. You just need to very gently hold your pants over the iron, fixed with the sole up. This strange method has its advantages - with its help you can easily smooth out the folds.

In the morning, you can quickly smooth out school trousers for your child, as an ironing device, you can take a regular pillow and cover it with clean material. Put the trousers on top of the pillow, cover them with a binder, and gently iron, barely touching the material with a heated iron. This method has an interesting feature: the cushion at the time of ironing will keep the heat coming from the iron, and it will warm up your pants well from the inside, so that they look newer in appearance.

Carefully inspect the pants, visually make sure that they are clean, and there are no random spots.Pants are turned inside out, ironed out, with special attention paid to those areas where there are pockets and a belt. Their initial adjustment can facilitate subsequent work on pointing the right arrows. Using a small board will help you - it is also very convenient to smooth out shirts on it.

Put all the lines together: first fold the seams on the pants so that the undercuts on top of the pants converge between each other and that there are no extra bends on the material. Turn the pants off again, and start ironing the arrows themselves. If you do not want them to come out double, do not move the sole of the iron at once along the entire length of the product, it is better to carefully iron the small fragments. If you want the arrows to be visible longer, rub the cloth from the inside with a dry piece of soap, and when ironing wet the gauze or other cloth with vinegar (dilute 10 g of vinegar in 1 glass of water). This solution will help you if glossy iron stains appear on the trousers.

As soon as you completely ironed the trousers from the inside, turned them over and stroked the top, simply fold the product so that the seam outside the leg and the inner hem are one under one. Lift the pants over the bottom of the leg and join together 4 seams. Then fold the seams on top and place your pants on a flat surface. Align all the seams of the pants on top of it. Arrow need to iron up to 7 cm to the belt and nothing more. Ironing shooter must begin with the knees. So that the seams do not “go away”, you need to connect them together in certain places with special pins. After proglazhki pants hang on the back of a chair. Do not wear them until the fabric is cool.

If you are in too much of a hurry and you don’t have time to find gauze or a piece of fabric to make your trousers look good, or you don’t have a convenient iron attachment nearby, you can simply replace gauze with a regular thin sheet of paper.

Trousers made of synthetic materials are ironed with a slightly heated iron. Moistening here requires only minor wrinkles or bruises, using wipes moistened with water. Leather pants need only hold a couple of minutes over the iron steam, and they will be straight.

If the trousers cannot be ironed, they should be carefully steamed with an iron having a steam function or you can use the help of a steam generator. This process can also be carried out with the help of a regular iron: arrange it horizontally and steam your pants with the iron at a distance of 3 cm from the product itself. You should not touch the fabric itself with an iron. Thus, you will be able to steam off trousers more than once.

Pants can always be smoothed out using a small wet gauze. It is best to iron the product immediately from the inside out, so that the fabric does not get stuck, and so that your trousers do not shine. Put the temperature characteristic of this type of fabric, install the iron itself on a wet piece of gauze and hold it until the gauze fabric is completely dry. If necessary, repeat this process a number of times, until the creases disappear completely. You should know that if there are scuffs in the place of the existing room, they will not disappear with it.

In life sometimes it happens that urgently need to have at hand stylish, perfectly ironed pants, but there is no such important device as an iron. Not quite standard methods or devices can help you.that will properly smooth your pants in any possible conditions.

• Par Stroking things that no one has long ironed, or pants with significant wrinkles will help you pairs. Stripping off the pants in this way is a rather old trick. Just type in the bath as hot as possible and hang over the bath those things that you need to iron.Hot steam can easily smooth out all the folds, and you only need to dry things a little later. This method is not very suitable for those ordinary people who are in a hurry.

• Hot metal mug. And this method of ironing without iron is very ancient. To iron things, steep boiling water is poured into a metal mug, and the products are smoothed with the bottom of the product. If you fear that the mug will leave marks on your trousers, then iron them through regular cloth or gauze.

• Press. Pants can be ironed in another, but very long way. Well, if you have a special ironing press, but what if you do not have it? Wash the product and carefully squeeze it. Lift the mattress, put the pants under this improvised press, and go to bed quietly. Body weight and mattress material will quickly smooth out and properly dry your pants, even in such extreme conditions.

On how to properly iron the pants with your own hands, see the following video.