Features of ironing presses for home and recommendations for their choice

Ironing is an integral part of the life of any family, but standing with an iron several times a week is by no means a pleasant pastime. Therefore, an increasing number of hostesses begins to give preference to ironing presses, greatly simplifying this routine.

Ironing press, as the name suggests, is intended for ironing. Previously, this device was used only for industrial purposes, for example, in dry cleaners or the clothing industry, but today the household press is quite possible to find in households.

From industrial they differ in their size - it is clear that in the conditions of an apartment or a private house you will be able to use only a moderately compact device. In addition to traditional ironing, the press will be used to attach patches, thermo-appliqués or flizelina.

However, the main function of such devices is the handling of large items, such as bed linen and curtains, as well as the ironing of a large number of things. It is also worth mentioning that knitted items treated with steam, acquire additional softness.

The convenient design does not allow to burn during an operating time unlike the same iron. It can be collected and put away in a convenient place for storage, as when folded, the press will not take up much space. By the way, installing the device will turn out not only on the floor, but also on the table.

Modern presses are used for processing natural and synthetic fabrics. In the first case, steam treatment is in progress, and in the second case, ironing occurs without steam exposure. The ironing press looks like an ordinary ironing board, but it can be of different shapes, for example, a square or even a trapezium. The device consists of two plates. The bottom, covered with dense foam rubber and natural fabric or heat-resistant synthetic, acts as a fixed ironing board and is fixed on the rack.

If necessary, the covers are easily removed, stretched and returned back. Also, replacement of covers in case of damage to the foam rubber will not bring any problems. The top plate is moving and, in fact, is a giant sole of the iron. It is made of either anodized aluminum or a metal with a thick non-stick coating. Most often both plates have one beveled edge.

The size of the ironing press can be different, but in any case, even the smallest is ten times the size of a regular iron. Usually the device has two main programs. The first is responsible for hydration. This happens as follows: first, the fabric is treated with water, then covered with a hot platform and treated with steam. The second program involves steaming. In this case, the liquid is immediately on the heating element, then evaporates, and with the help of the vapor that has occurred, the fabric is processed.

Before ironing the device is connected to the outlet and the required temperature is selected. Clothing is placed on the bottom plate, smoothed and covered with the top, already warmed. The processing takes place due to the fact that the pressing element levels the jars while the material becomes elastic. About the end of the work, most likely, will notify the special sound signal. It will be enough to open the device and change things to new ones. It is important to mention that the ironing press prevents the burning of linen, because if you leave the thing inside for more than thirty seconds, the work will automatically stop. The same will happen with the open device, left without work for more than a quarter of an hour.

Typically, a heat press is equipped with a small iron to reach hard-to-reach places and iron small parts. In addition, there is a spray bottle with a spray bottle for pre-wetting and a steam generator for steam treatment. It is worth mentioning that the steam generator allows you to successfully iron even the laundry, which is folded in several layers. Working on a thermal device, you must carefully straighten your clothes and, if necessary, reduce the area by folding. Buttons and other decorative elements are best protected with a cloth. Excessively wrinkled fabrics are pre-moistened, and dark and knitted items are additionally protected.

If the laundry is too large, then during ironing you will have to move it, bringing it closer to you. Stroking things with appliqués, they must be turned out. In addition, for each type of fabric is to pick up your temperature and do not close one thing inside for more than fifteen seconds. During operation, it is important to adjust the position of the cord and make sure that it does not touch the hot plate, and also in no case place the hands between the plates while the ironing press is working. Sleeves and darts should be pressed using special volume pads, and synthetic products - with the program "Dry ironing" and low temperatures.

By design, ironing presses can be subdivided into those that are equipped with a steam generator and those that do not have them. If there is no such device, then you will have to moisten things yourself with a hand-held spray gun. In the second case, steam is formed right inside the device and thus the necessary moistening occurs. As you might guess, devices with steam generators are more expensive, but they better iron fabrics. According to the principle of operation, ironing presses can be divided into those that operate in the steam mode, and those that operate in the moisture mode.

• One of the most popular is the device VLK Verono 3200. This model allows you to work with different tissues, not only standing, but also in a sitting position. The device is equipped with automatic steam, as well as temperature control heating. He is ready to work in just 480 seconds, and the maximum temperature is 220 degrees. However, the fluid reservoir is not large and requires regular replenishment of water.

• A good model is the press. MIE Romeo IV Silver. It has a built-in steam generator, temperature control and a sound signal indicating the end of work. Reinforced steam allows you to work with different fabrics, from flax to denim. This model also has a volume reservoir and a Teflon coating.

• It is worth mentioning about ironing press FAMILY LILIA 560 White. It allows you to quickly cope with large volumes of work, use additional accessories and maintain the best temperature during ironing.

• A good model is also called MANGANO 810 X-EL with an enlarged lower plate and a steam generator.The device has five temperature modes, a touch panel and auto power off.

• An interesting solution is Mie Romeo III. It also has an integrated steam generator, but beyond that, the model has temperature and water hardness controllers. Water tank is removable, which greatly simplifies the process of work.

Choosing an ironing device for the house, of course, it is worth choosing a small model. The frequency of the press should not exceed fifty hertz, and the voltage should correspond to 220 volts. It is also recommended to choose a press with a capacity equal to 2200 watts and an average steam capacity reaching 80 g. per minute. In addition, it is important to carefully consider the available equipment. The water tank should be disconnected and connected without any problems, and safe legs with rubber should be available.

In addition, it is worth taking a device equipped with a steam generator, with a surface pressure on the fabric, ranging from forty-five to fifty kilograms. However, thin and delicate fabrics can only be processed at a pressure of thirty kilograms. The bottom panel should be covered with Teflon and have a cotton cover. In addition, it is good when there are additional devices for processing hard-to-reach places and a platform designed for hoses.

The size of the press itself must depend on the available free space., as well as the size of the laundry to be ironed. Hesitating between the electrical and mechanical model, it should be remembered that the second will cost less, but the first will be protected from overheating and equipped with an independent shutdown system. Teflon and aluminum, used for the manufacture of plates, also have their pros and cons. Teflon fails faster, but carbon periodically occurs on aluminum.

In general, ironing presses receive positive feedback. Especially popular are those that allow you to work while sitting and not to strain your back. In addition, "with a bang" welcome the opportunity to choose the desired mode of operation, adjust the temperature and use additional devices, such as pads for ironing sleeves.

In the next video you will find a review of the ironing press MIE Romeo II.