Eyebrow modeling: purpose and technique

Today, almost every girl is very careful about their eyebrows: their shape, color, saturation. If you correctly adjust the shape of the eyebrows, the look will be deep, and the eyes - bright and expressive. That is why eyebrow modeling is considered one of the most popular services in beauty salons.

Eyebrow styling is a procedure with which you can change the color of the eyebrows, their shape, thickness and width. To do this, take into account the shape of the face, eye shape, hair color and skin tone. Proper modeling of the shape of the eyebrows will give the face expressiveness and make the eyebrows neat and natural.

Eyebrow modeling consists of three stages:

• training;
• plucking;
• registration.

Within two to three weeks before the procedure, you can not pull out the hairs to simulate the correct shape of the eyebrows was convenient. You also can not paint them a week before the simulation.

Then you need to choose the bend of the eyebrows, which are suitable for your type of face, to determine the width and saturation of the hair color. Now fashion dictates its own rules, but it has a tendency to change very quickly. Therefore, you need to choose a form of eyebrows, which is really like and suits you.

The main task of modeling eyebrows - hide flaws, focus on strengths and make your face more sophisticated.

If you have a square face, you need to make his features softer. Therefore, fit eyebrows semicircular shape, slightly raised and not too thick. In this case, the shade can be made a little lighter. Narrow or straight arcs will not fit, because they will make the face wide and ridiculous.

If you have a round face, you will need curved eyebrows, because in this case you need to narrow the face. The bend of the arcs should give expressiveness to the look, although it should be avoided too sharp corners. The raised eyebrows will also help to narrow the face. For a round face, exactly too thin, too thick and straight arcs will not work: they will fill the face and give it rudeness.

If your face has a triangular shape, you can make straight eyebrows, but do not get carried away so as not to land the look. Although also suitable and curved arc with a pronounced arch.

For owners of a rectangular face, the right decision will be straight eyebrows. Their ends should be tapered, and the arcs themselves should not be too close to each other. Slightly curved lines may also come up, as they soften the look. Eyebrows with a sharp bend and a high arch is definitely not worth choosing.

If you have a pear-shaped face, that is, the lower part is wider than the top, you need to restore the proportions. To do this, eyebrows should be thick and wide. They need to compensate for the width of the chin. Bend arcs should be selected in accordance with the facial features and change the angle of the bend.

For girls with the shape of a face in the form of a diamond need eyebrows that can smooth out sharp corners. In this case, fit the line with a smooth bend, softening facial features.

Owners of an oval face were the luckiest ones, because any eyebrow shapes are suitable for such girls. Excellent options will be curved with a smooth arch, straight with a slight bend or eyebrow "house".In this situation, you need to rely on your own preferences.

To determine the curvature of arcs at home, you will need a pencil or something narrow and long.

Follow the following scheme:

• apply it to the wing of the nose and draw through the inner corner of the eye - at this point there will be the beginning of the arc;
• the point of the end of the arc is also determined only by holding a pencil through the outer corner of the eye;
• to determine the highest point of the eyebrow, you need to put a pencil to the tip of the lips and hold over the edge of the pupil.

All these points can be marked with white pencil for convenience. When selecting the shape of the eyebrows, it is necessary to take into account that two thirds should go up, and one third should go down, and the beginning and end of the arc should be at the same level. The distance between the arcs should not be too large - just two centimeters or two fingers.

In order to reduce pain while plucking hairs, you can attach a cotton pad moistened with hot water to the treated area.

There are several ways to model your eyebrows yourself.

For this procedure, you must have the right tweezers, the edges of which are not very sharp and there is no gap between them. It is necessary to pluck hairs in good light and only for hair growth, so as not to irritate the skin. An important point is also that you can pull out only the lower part of the eyebrows, otherwise you may get the wrong shape.

In this case, you can use wax granules or finished wax strips. This method is more designed to remove light soft hairs around the eyebrow. The disadvantages of this procedure may be allergies or skin irritation.

Thread modeling, also called triding. In order to perform the triding, you need to take a thin cotton thread about 40 cm long and connect its ends. Put the ring on your index fingers and thumbs and scroll through the “eight” three or four times. Loop to pick up hairs and sharply scroll the thread, while moving against the growth of hair. As a result of these actions, the hair will be pulled out.

Before and after the procedure, you can cool the skin around the eyebrows using ice. You can also remove irritation antiseptic. Simulate eyebrow thread faster than tweezers, because it captures several hairs at once.

Most girls use this method, but few know about the nuances of this technique: you can’t draw clear lines and bends with a pencil - you only need to dye the hairs. Color saturation should smoothly go from root to tip. If you have a light shade of hair on your head, then the color of the pencil should be taken a bit darker, and if you are a brunette, then vice versa. Pigment at the beginning of the eyebrow need to be shaded, and at the end to give a clear shape to the arc.

This procedure can be carried out at home. To do this, add a few drops of water to dry henna to form a slurry. Then gently apply the mixture to the eyebrows. In order not to stain the skin around, you can apply a greasy cream, but do not fall on the hair of the eyebrow. It is necessary to wash off the henna in 10–15 minutes (pay attention to the time specified by the manufacturer) with a wet cotton pad.

The result of this staining will last from two to three weeks. Two days before the procedure, it is necessary to test for an allergic reaction. Apply the product to the inside of the elbow with a cotton swab. The procedure can be carried out if within 48 hours no irritation has appeared.

In comparison with other techniques, henna eyebrow dyeing looks as natural as possible due to the naturalness of the product. And henna has nutritional components that restore and protect eyebrow hairs.

This method is suitable for girls whose eyebrows grow in different directions and bristle. The gel will model the desired shape and will fix the hairs. It may be tinted or colorless, applied with a brush or a tube brush. The disadvantage of this method is that the gel dries for a long time, as a result of which it can be accidentally lubricated. Therefore, gel eyebrows should be placed several hours before the exit.

In order to keep the eyebrows in perfect condition longer, It is necessary to follow several rules.

• Periodic correction should be made (pluck out excess hairs that grow out of shape).
• It is necessary to reduce the time of contact of eyebrows with water (if they are painted with henna or paint). Especially strongly washes natural dyes salty sea water.
• To strengthen and nourish hair, you can make masks from natural oils, for example, from castor. It nourishes the hair and promotes their growth.

You will learn more about eyebrow modeling in the following video.