Scraper for glass-ceramic plates: types, how to choose it?

Plates with a glass-ceramic surface are gaining increasing popularity. The material of the hob is spectacular in appearance, simple and easy to use. Rapid heating and cooling brings economic benefits. Care of the stove is possible without much effort, especially if the hostess has a special scraper.

The advantages of ceramics are indisputable, but the plates have one powerful negative quality - the need for careful care. For delicate care, traditional means and devices are not suitable. However, stains from fat, sugar, broth or milk should be removed anyway. For these purposes, developed a special paddle. Knife for cleaning glass-ceramic surface successfully cope:

• with dried residue on the surface;
• with burnt areas.

When operating the scraper, the ceramic hob will remain without damage and scratches. This is possible thanks to the variable tool angle. Using the device will eliminate the appearance of scratches. It is known that even small cracks will add an untidy look to the kitchen panel. The plate as a result not only looks bad, but also works badly.

The scraper for cleaning the glass-ceramic plate includes the following mandatory parts:

• handle - the item is steel or plastic;
• the blade is usually stainless steel, can be solid or adjustable;
• screw - this item is in the adjustable options, fixes the cleaning sheet.

Since avoiding contamination of the slab is almost impossible, the scraper becomes a mandatory purchase. Some manufacturers supply household appliances in conjunction with this device, which simplifies the task of choice. Many manufacturers of plates recommend the use of a scraper for a reason - sponges and cleaning abrasives cause scratches. As a result, the electric stove quickly loses its original appearance. Since the scrapers do not cause damage, care is simplified, and the lifespan of household appliances is extended.

Many users find ceramic hobs short-lived just because they need to be replaced after the slightest scratches. To prevent them, the glass-ceramic stove must be washed with special compounds. For cleaning, you can not use aluminum devices, which will leave behind ugly strip. With high-quality operation, large-sized household appliances fully comply with the warranty period, which for most manufacturers reach 10 years.

Bosch, Electrolux, Gorenje, Indesit, Whirlpool - manufacturers who supply a household line with related products. For example, trademark indesit produces scrubbers with high efficiency on warm ceramics. At the same time, the devices are safe, they easily cope with old spots.

One more manufacturer of scrapers "Filtero" offers inexpensive models with a plastic base. The tool can be tried in operation on different surfaces, as the knife itself is made of durable metal. The steel plate is movable, which ensures safety. In the case of the model there is a hole, so it can be stored in limbo.

Manufacturer "Pyramid" offers a multifunctional tool designed for cleaning any surfaces. The tool is equipped with a rubberized handle, which has an anti-slip effect. The blade of the tool is two-way, which adds comfort when using.

Top House is a manufacturer that offers a whole cleaning kit including:

• effective metal scraper:
• set of additional 4 knives;
• special napkin 30 * 35, which is suitable for the care of glass ceramics;
• 300 ml of a special cleaning agent that even cope with old dirt.

The main dimensions of the classic scraper are 13.5 * 4.5 cm, the blade size is 4.3 * 2.2. The parameters of the products of different manufacturers are similar, only the appearance is different. The cost of products associated with the materials used in the manufacture of scrapers, as well as the fame of the company. At the cost of the model are from 100 to 600 rubles per copy.

• Inexpensive multi-scraper only suitable for glass ceramic plates. The “Economy” device MS58-171 from the Multidome brand has a gray color and is not particularly attractive, but it will cope with the task associated with cleaning the stove. This economical purchase scraper is recommended by 100% of users, positively evaluating convenience, reliability, design, safety.

• Electrolux scraper in contrast to the previous device, only 80% of users are recommended to purchase, positively noting the same characteristics as the previous model. The main drawback of the model are expensive replaceable knives. The handle of the blade with time of use quickly rust, due to which it loses an attractive appearance.

• Tescoma Presto Scraper presented in black colors, its cost is almost 400 rubles. The functionality of the scraper does not differ from previous models.

• Dr. Beckmann - another popular model, equipped with a plastic handle, optional removable blades. The stores are provided with a tool for cleaning ceramics. The set costs about 600 rubles.

• GEFU - expensive modelwhich is positioned as universal. Quickly and effectively removes dirt, not only from the surface of the slab, but also from the tile, as well as glass panels. Spare parts are conveniently folded in the handle of the scraper, the model does not require additional storage space.

When interacting with cleaning agents, scrubbers easily remove even the most old and dried spots from the glass-ceramic surface. If the delivery kit with the plate does not have the appropriate tool, then the question of choosing this part arises.

If there is a task to save, you can pay attention to plastic models. They are cheaper in cost but less practical. There is a high probability of failure in a short time, which would not be a very rational decision. After some time, you will again have to spend money from the family budget on this item.

To assess the product can distinguish the following key parameters.

• Manufacturing firm. Excellent supplier recommendations can be a good guarantee for the quality of the scraper.It should be borne in mind that the models of such well-known companies like Bosch, Electrolux, Gorenje, Indesit, Whirlpool are usually expensive.
• The thickness of the knife. It is necessary to pay attention to this factor, because the thin cutting part is considered more convenient to use. If the product is of poor quality, it will quickly wear out. The blade protrudes only a couple of millimeters from the scraper body, but it will be very inconvenient to use a thick scraper.
• Hanging hole. Rare models are supplied with this small detail. However, it allows you to accurately place the object among household utensils. At the same time the working tool is always nearby, in the eyes.
• The possibility of cleaning. Most modern products are subject to care in the dishwasher. Products are not afraid of the action of chemical compounds. During the process are not deformed. Properly selected scraper will be a good helper, but with proper operation.

When cleaning fragile glass ceramics, you need to consider some details and features. For example, in some cases it is possible to work only on a completely cold surface. It is advisable to clean the glass-ceramic panel with a scraper in case of:

• large amounts of heavy pollution;
• the presence of burnt parts.

In other cases, you can use the usual cleaning compositions and soft rags. For general cleaning, you must additionally use products suitable for glass ceramics. These are usually gel or paste-like substances. On the surface, they are distributed neatly, using a microfibre cloth.

If the product forms a film, it should be removed with a scraper along with dirt. The tool must be installed to the surface at a sharp angle of 30 degrees. Contaminated areas are treated with movements “backward / forward” until ceramics are clean.

The working tool after use requires thorough washing with warm water, you can use detergents. After processing the tool is dried, otherwise the knives will quickly become dull. It is difficult to use the product in this condition, dull blades require mandatory replacement.

A scraper with sharp blades should not be replaced with similar sharp objects that seem suitable for cleaning a glass-ceramic surface. Pollution is strictly forbidden to delete:

• sharp kitchen knives;
• metal sponges and hard sponges;
• abrasive cleaning compounds;
• aerosols for ovens;
• conventional dishes compositions.

The surface is not recommended to wipe with a sponge, which was previously used for plates and pans. The remaining thin layer of fat from the surface of the sponge will create a thin film on the surface of the plate. When heated, it will burn out, the working burners will lose color, they form stains that are very difficult to remove. Ugly stains are removed only expensive compositions designed to care for steel.

The following types of cleaning products are allowed on the glass ceramic surface:

• for glasses;
• vinegar;
• soda.

In order to preserve the original beautiful appearance of the surface longer, you must follow the mandatory rules associated with the care of the stove.

• Regular surface cleaning. Clean the stove immediately after cooking.
• Eliminate the use of potent agents. Stain removers and universal products are unlikely to be suitable for glass ceramics.
• If it is intended to thoroughly clean the heavily soiled surface, food remains are removed first with a scraper, then a cleaning liquid is applied, which is rubbed with a cloth, only then the surface is wiped dry.

When you turn on again, you need to follow the exclusion of food residue at the bottom of the pots or the surface itself. Burnt food will be difficult to clean from the surface. Plastic and foil will bring particular harm to the plate. If these components fall on a hot surface, they will melt and it will be difficult to remove substances even with a scraper. This tool for glass-ceramic can be used to clean stainless steel pans and pans.

On how to choose the right scraper for glass-ceramic plates, see the following video.