The device for manicure Marathon

Working in the salon, the nail service master simply cannot do without a manicure machine. But at home already many of the weaker sex have such equipment. The market offers a huge range of devices of this orientation with different functionality at different prices. Among professional devices for manicure, TM Marathon devices deserve special attention.

Apparatus for manicure Marathon produced by the famous South Korean company SMT, which was founded in the 70s of the last century. Initially, this company produced high-power devices used in dentistry and cosmetology, and then mastered the production of devices for the nail industry. The company's products are known all over the world and are quite popular.

Under the brand name Marathon are available devices for both professionals and home use.

Marathon manicure machines have several advantages.

• High quality products proved high demand for such devices.
• The convenient design is thought over to trifles - it is comfortable to use the device.
• The low noise level that the milling machine produces will not be distracting during operation.
• A convenient mechanism for changing nozzles will not spend much time on the procedures. It is suitable for most manufactured milling cutters.

• Most models are equipped with pedals for foot control, which facilitates the work of the master.
• All mills have the ability to reverse movement.
• The built-in overheating protection system will help to keep the device in working condition for many years.
• A wide range of products will allow you to choose the device with the necessary technical characteristics.
• All equipment has a warranty. You can replace worn parts in the post-warranty period - in many cities there are TM Marathon service centers.

The range of these devices is quite wide. Below are a few devices that are particularly popular.

• Marathon 4. Refers to portable devices. It has four speeds that are switched by a mechanical handle. The maximum rotational speed of such a mill is 35,000 rpm. / min., the power of the device reaches 40 watts. The device weighs a little more than a kilogram; the block parameters are 150x85x70 mm.

• Marathon 3 Champion. This is one of the most popular models with professionals. It is equipped with a smooth speed controller, which can reach 35,000 rpm. / min Its power is 45 watts. The size of the device is also small - 115x155x80 mm, weight is 1250 g. The case has convenient openings for storing nozzles that may be needed during operation. The device is available in white, blue and pink. It does not heat up, it can be used without shutdown for 2 hours.

• Marathon N2. A feature of the device is the ability to smoothly control the speed using a foot pedal, which frees your hands from having to manually set the speed, which in this device reaches 40,000 rpm. Another convenient function of the device is the ability to turn on the reverse, without reducing the speed. The power of this router is 50 watts. The dimensions of the block are 147x115x96 mm. The device weighs 2.5 kg.

• Marathon Multi 600 DUO. This is a high power brushless device.Such a device is equipped with a touch control, has an LCD display that shows the speed of rotation of the cutters. It also indicates the error code in the event of a malfunction, which allows the master to correct it without performing diagnostics. Adjusting the speed of the device is made manually and with the help of a pedal. Also, the device is equipped with an auto cruise function. Milling cutter speed reaches 50,000 rpm. / min., its maximum power is 230 watts. The weight of the device corresponds to 2.9 kg, the parameters of the block are 268x122x228 mm. If necessary, the device can be fixed to the wall.

• Marathon Handy 702. The device has an increased power, which is 100 W, touch control, speed indicator, auto cruise function. The device operates at a maximum speed of 40,000 rpm. / min The device weighs about 2.5 kg, the dimensions of the control unit are 232x180x137 mm.

In order to make a hardware manicure using milling machines TM Marathon, Follow the instructions described below.

• 30 minutes before the procedure, you need to prepare your hands: wash the skin well with soap, remove the old coating.
• Manicure procedure begins with the treatment of the cuticle. At first it is pushed aside, lifting, cleaning the “flame” or “candle” of the pterygium with a nozzle. Then carefully cut the cuticle itself with a nozzle "ball".
• After this, the nail plates are given the same length and shape with the “cylinder” cutter.

• In the next step, the surface of the nail plate and the skin around it are polished.
• Clean the horny particles from the surface of the hands with a dry brush, apply a decorative coating, moisturize the skin.
• Now all the mills that were used in the work should be disinfected and sterilized. The device itself must be wiped from dust.

By purchasing a device for manicure Marathon for the first time and not having the skills to work with such machines, There are several aspects to consider.

1. Decide what the mill is acquired for. If you need it for home use, then you should look at the device with a minimum set of functions. Do not overpay for touch control or car cruise.
2. Beginners do not need to acquire a device with high power - it is easy for them to cut through the nail plate, as there are few skills in working with the machine. You need to work at low speeds, while not strongly pressing the handle of the device.
3. It is better to select cutters in accordance with the work that needs to be done. Do not experiment. Starting the procedure for the first time, you should choose softer ceramic nozzles with a red notch.
4. The handle of the device must be kept in such a way as you hold a regular pencil. It is necessary to touch the nail only with the side of the cutter.

Professionals often prefer Marathon manicure machines. These are worthy milling cutters, the price of which fully corresponds to the quality. Masters using these devices, note their high power, stable operation, small size. As disadvantages mention the lack of cutters in the kit, as well as the fact that the nozzles need to be bought separately. In addition, it is worth noting that on some devices, on the speed knob, there are no parameters for turns, so they have to be set "by eye".

You will learn more about how to make combi manicure with the Marathon-3 Champion device from the following video.