Features of the choice and use of the device for manicure Mercedes 2000

Women can look after their hands not only in salons, but also at home. To do this, you will need to buy a Mercedes 2000 manicure device. With it, you can make an unedged manicure, in which the skin around the nail is not cut off, which means that it can not be injured, only the keratinous cells are removed. One of the advantages of using this device for a manicure is ease of use and reliability, high power and efficiency in comparison with the classical means for processing nails.

When using Mercedes 2000 You can achieve the following results:

• to eliminate the solid particles of the skin, and this is the main thing when carrying out manicure and pedicure;
• remove the skin around the nail;
• cut gel varnish or any other;
• to shape the nail.

Fraser is a tool that runs on electrical power. It consists of the following components.

• Body It contains a power supply, a knob for adjusting the speed of the cutter, a button for connecting and disconnecting.
• A pen. This is the main element of the device. It differs in ease that the hand did not get tired. It contains a milling cutter, the second end of which is fastened through a wire to a special connector. There is a built-in suction, which is used to eliminate nail cut or artificial turf.

Use of this router include the following steps.

• Put the device on some surface that should not be wet. Insert and fix the desired cutter well.
• Set the speed to the smallest value.
• Turn on the network.
• Choose where the cutter will rotate, you do not need to switch the reverse in the process of nail design. If you need to change the direction in which the mill is moving or the mill itself, you need to turn off the device, otherwise you will not avoid injury, then the device will quickly break.
• The device is started using the power button and the buttons on the handle.
• Set the speed, it needs to be changed carefully.
• When the work is finished, put the regulator on the smallest value, then the cutters will stop rotating.
• Now you need to turn off the buttons on the case and the handle and turn off the network.

To get the desired result, you need to have an idea how to use the device for a manicure. Before the very beginning of use, it is necessary to study the attached instruction. The processing of nails is done with absolutely dry skin. If you want to hold your hands in warm water, then this procedure should be done a couple of hours before the manicure.

This type of nail treatment is done 2 times a month. When using the device at home, it is necessary to disconnect it every 20 minutes so that it does not overheat. In the process of processing the nails do not need to squeeze the handle strongly, so as not to lead to its deformation.

To make the device work for a long time, The following types of care must be observed:

• to clean all parts of the router from dust;
• that the cutters are not exposed to moisture and sunlight, they are best kept in a special bag;
• make sure that the power cord is not twisted;
• disinfect the nozzles and dry them well.

One of the varieties of the device is the Lina Mercedes 2000. On its frame there is a lever for regulating the rotation of the cutters and reverse. It has a comfortable handle convenient design that does not vibrate, it is a favorable side of the application. There is also a stand for it and cutters in the amount of 6 pieces, having a diamond coating. The number of revolutions per minute is up to 20 thousand. This device is good to use at home and in the cabin.

Responses of the women using this device, and masters of salons generally positive.

They point out the following favorable aspects:

• It is much cheaper to do the nail treatment yourself;
• attractive value;
• convenient and easy to use, reliable and high quality;
• Included 6 nozzles and 6 abrasive graters.

Review of the device for manicure Lina Mercedes 2000, see the video below.