Arch nail design

Thanks to the arched modeling, even the longest extended nails acquire a natural curve and look natural and beautiful. And on the contrary, if the masters neglect this technology, then as a result the nails look very ridiculous and artificial.

From the usual gel nail extension, this type differs only by using special clips to create a bend. The fact is that our nails by nature have a small C-bend in cross section. If we increase nails for tips, then it is already laid in the form of the blank itself (but not so pronounced).

There are also situations when their nails are deprived of this beautiful bend. Then it is the arched modeling that can save the situation. After all, if you leave everything as it is, then the extensions of the marigold will be more like small shoulder blades. In addition, the strength of the nail itself will increase, which will be the key to long and trouble-free socks.

Arched nail design has several advantages over conventional ones. That is why it remains at the peak of popularity, despite all the new technologies emerging in recent times.

• This technology allows you to hide all the flaws of the natural nail. In addition, if you have an irregular shape of marigold from nature, then modeling with a gel will correct it and set the correct direction of growth.
• Beautiful and natural bend. This is impossible to achieve either with the usual varnish or shellac. The gel, the shape of which is attached with the help of the form and clips, easily copes with this task.

• This manicure has a high degree of strength. Marigolds will be protected by a rather thick layer of gel, and due to bending, they will not cling and become more resistant to small blows.
• All nails will have the same length and shape, which is the key to any beautiful and neat manicure.

• You can cover the finished form with both ordinary varnish and gel varnish. In this case, the coating will stay much longer than on natural marigolds, due to the strength and static structure.
• You are not limited in the choice of the shape of the nail. It can be either a square (or soft square), or an oval or almond shape. Beautiful bend only emphasizes the beauty of the selected option.

• You are not limited in the choice of nail design. Building up can be done immediately in color or leave the field for imagination. In this case, you can choose the style and design of their own. You can also change it without performing a correction, but simply by removing the old coating.
• When arch modeling the thickness of the nail will be significantly less than when building on tips. In addition, only with this type of nail modeling can correct the growth direction (especially if the nails tend to curl down).
• We should also note the strength of the free edge. After all, he most often breaks off during operation. If you have repeatedly encountered this problem, then try the arched modeling.

In spite of all the positive moments, there are situations when it will be impossible to build with arched modeling (however, like any other). The fact is that in certain conditions our organism will interact worse with the gel and reject it. The result is inevitable delamination.

• Chemotherapy. During this period, the body spends a lot of effort on recovery, and the additional load and physical impact will be superfluous.Yes, and marigolds are likely to be bad hold.

• Change hormonal levels. These may be age periods or pregnancy. Most clients note that under these conditions the nails begin to peel off very quickly. Moreover, during pregnancy it is better to protect yourself from such procedures. First, you will inevitably have to breathe the dust, which is formed as a result of sawdust. Secondly, the smell of acrylic or gel can cause undesirable effects.

• Use of antibiotics and some other drugs.
• Infectious and inflammatory processes in the body.

Arched modeling is a rather complicated procedure. For its ideal realization, a certain experience is required. In addition, the masters are familiar with some of the secrets that are the key to a perfect manicure. Some of them we will share with you right now.

• Pay special attention to the preparation of nails. They must be degreased before applying the base coat. In addition, it is important and sawdust. From these factors depends on the end result, and life.

• Use only professional materials and tools. They are more expensive than their counterparts. But this is not just a whim of manufacturers.

• Arched extension technology requires a certain amount of experience and knowledge of the structure of the nail (as well as those problems that may be present). Trust your nails only to professionals. They themselves will determine what material (gel or acrylic) is suitable in your case. They will also advise you on the best shape and even design.
• It is important to choose the right template to build and install it correctly on your finger. Even a small error or gap between it and the nail will lead to a worsening of the final result.
• When applied, the material should not be allowed to penetrate the skin. In the future, this will lead to rapid detachment. Even if the material was removed at the stage of sawdust.

• Beautiful bending is achieved not only by special clamps, but also due to the correct thickness determination. Along the edges it should be minimal, and in the center - the maximum allowed.
• A good master will certainly take into account your wishes.

• 1 step. First you need to get rid of the old nail cover. If it is a simple varnish, then remove it with liquid. Waxed nails or shellac are removed with special tools.
• 2 step. The free edge is cut to a size of 1.5 mm and make it smooth. All marigolds should be the same length. Use a nail file for natural nails.

• 3 step. Apply a remuver on the cuticle and remove it. On the surface of the nail plate we pass baf.
• 4 step. Next comes the turn of the primer. Apply it on the nail and wait for it to dry completely.
• 5 step. Apply base coat. Make sure that it does not come into contact with the cuticle. On the sides, it also should not touch the skin.

• 6 step. Now it's time to set the template (or form). Try it on the nail and cut to size. The form should fit snugly to the nail. Between her and his fingernail should not be even the slightest gap. We fix sticky ends on the finger and once again check the accuracy of the installation.
• 7 step. Take a brush and apply a small layer of gel on the free edge and area on the form, dry. Next, we drive in the gel (this will ensure reliable adhesion of the gel and the natural nail) to the entire surface. Dry again.

• 8 step. Remove the sticky layer, slightly file the smile area with a nail file and again lay out the gel, simulating the future shape.
• 9 step. Remove the sticky layer, remove the form and take special clips. We fasten them on the nail and adjust to the desired degree of bending and pressing density to the nail. In the UV lamp we fix the result.

• 10 step. Remove clamps and produce sawdust. At this stage, all parts of the nail should undergo processing: the free edge, arch, lower walls of the nail.
• 11 step. It remains only to fix all the finish and dry.

Arched nail design does not lose its popularity. It allows you to create a beautiful shape that will delight you for more than one week. You are free to choose the length, shape and design of your choice.

Master class on arched nail modeling, see the following video.