Machine for manicure: how to choose and use?

Well-groomed hands are considered the calling card of a girl, they complement the image and make it more feminine and beautiful. Thanks to modern technologies and equipment, it became possible to make high-quality manicure not only in professional salons, but also at home. To facilitate self-care of the nails, it is enough to purchase a manicure machine and perform the cuticle and nail plate processing with it.

Recently, many representatives of the fair sex prefer hardware manicure, which is carried out with the help of a special machine, called a router. This device consists of a housing with a built-in power supply and a working handle on which various nozzles can be inserted. The machine has a speed controller, on / off mode and indicator. In addition, professional models also equip the foot pedal, allowing you to conveniently switch the speed.

Thanks to the manicure machine, you can quickly and easily take care of nail plates and skin of hands.

This tool is indispensable for those women who have stratifying and brittle plates, because it reduces the risk of injury and the formation of allergic reactions.

Despite the fact that the nail machine is multifunctional, it is most often used to create a manicure. To perform the procedure at home, it is recommended to purchase the device with a speed of no more than 10,000 o / m. In beauty salons, masters use equipment with head rotation up to 30-35 thousand o / m. For nail processing machine must be equipped with a minimum set of nozzles.

• Cutters. They are cutting blades that help to remove fragments of hardened skin.
• Boron. This tool performs the removal of the cuticle.
• Polisher. Made of silicone and coated with a special component with a fine abrasive. White nozzles can give smoothness to the nail, blue is used to treat gel and acrylic surfaces, and dark ones eliminate corns and dense formations on the skin.
• Grinder. It helps to correct the shape of the plate and aligns the grooves and waviness on the surface of the stratum corneum.
• Cap. It is a disposable instrument and is used to treat hardened skin.

Thus, having the device and all the above-mentioned nozzles, you can tidy up the marigolds independently and qualitatively prepare them for the subsequent design. Thanks to simple actions, in a short time, it is possible to correct the length and shape of the nail, to remove the cuticle and coarse skin. After this procedure, the manicure is perfect and retains its attractive appearance for a long time. In addition, the hardware manicure protects the nails from damage and makes their surface even and smooth, which is important, for example, for a French jacket.

No matter how beautiful gel nail design is, it sooner or later loses its attractiveness, so it has to be removed. In this case, the easiest and most accessible way will be to use a manicure device - it will provide a painless and careful removal of shellac.Unlike the procedure of creating a manicure, the removal of the gel or acrylic is carried out at a higher speed of rotation of the cutter and requires care. For cleaning the nail plates are used metal and ceramic nozzles with large notches.

Metallic ones are made of hard alloys and are well suited for removing a thick layer of gel. They can operate in two modes: reversible and direct. The main advantage of the nozzles is also considered that they do not create gel dust.

The process of removing the gel with a nail clipper is simple. To this end, the master occupies a comfortable position and begins work on the cuticle area, performing movements, first clockwise and then against. Then clean the plate on the edges, holding the machine from top to bottom. After the hardware removal of the gel, the surface of the nail remains in the same condition as before the extension.

To date, the market offers a large assortment of manicure devices. In addition, each model may differ not only in design, but also in functional features. Therefore, purchasing a product, it is important to pay attention to some basic indicators.

• Power. If the manicure machine will be used in the salon, then it is desirable to choose it with a high speed of rotation of the cutters. For home use, however, the device is perfectly suited for speeds up to 10,000 o / m. It is much cheaper and will allow the beginning master to get skills in the work without injuring the nails. For products without a built-in vacuum cleaner, the optimum power is from 30 to 60 watts.
• Type of engine. Devices are issued with collector and beskollektorny engines. The first type is most often found in simple models, such motors at high speeds create a lot of noise, quickly heat up and fail. The second option is considered more progressive and technological. These engines work silently, as they consist not of brushes, but of special sensors.

• The location of the cord. Its length should be optimal and not interfere during operation. If the cord is long, it will constantly assemble into a knot and twist, which will cause a lot of inconvenience. In addition, the place of fastening of a wire with the handle has to be well isolated. The shape of the wire can be both straight and twisted.
• No vibration. The machine should not create vibrations at high speeds.
• Handle hardware device. Usually the weight of the handles ranges from 150 to 200 grams. For work, it is best to choose a pen that is heavier, since during the procedure it should not vibrate. The diameter of the handle is chosen so that it fits easily in the palm of your hand.
• The presence of nozzles. As a rule, most models of manicure machines are equipped with the right number of nozzles (usually five). However, some manufacturers complement the device only with a minimum set. Therefore, this nuance must be foreseen in advance and, if necessary, additional purchase of files and cutters. The full set includes ceramic, metal and diamond cutters.

• Pedal. Due to the presence of a foot control, the work process is facilitated.
• Built-in vacuum cleaner. An important condition for creating a manicure is considered to be general hygiene and keeping the workplace clean. The presence of a vacuum cleaner will save you from the formation of gel dust and protect the master from allergic reactions. This is especially important in the salons where a specialist has to serve many clients per day.
• Place of work. In the event that the master plans to perform a manicure not only in the salon, but also at the clients' home, it is necessary that the machine be additionally equipped with a handbag or small suitcase for carrying.
• Overheat protection. With frequent use of the device, it can overheat and fail.That is why a function must be provided that protects equipment from damage and prolongs its operation.
• The ability to enable reverse rotation. The presence of the reverse is important when processing not only the nail plate, but also the cuticle.

In addition, the cost of the product, brand awareness and user feedback should also be considered.

You also need to make sure that the typewriter has a standard clip and all types of nozzles are suitable for it.

After the manicure machine is selected and purchased, you can safely perform a manicure at home, but you need to use the device correctly. This will help avoid injury and prolong the life. Before you begin, you must carefully inspect the control unit, micromotor, pedal and make sure that they do not have visible defects. Depending on the type of nail treatment, a special nozzle is selected and gently fits into the nest of the pen tip. It needs to be inserted to the full stop and well fixed.

During operation, the speed limit also plays a huge role, the rotational speed of the cutters should not exceed the allowable value - this can lead to microvibration of the motor and subsequent malfunction of the device. At high speeds of rotation, not only the nozzles, but also the apparatus will heat up. The motor starts to work when you press the pedal, its speed should be adjusted smoothly. Replacement of nozzles is allowed only when the device is completely disconnected from the mains.

Regardless of whether you plan a simple manicure or removal of the gel, the master should use personal protective equipment: a screen (glasses), a mask and gloves. If during the operation of the micromotor felt increased vibration, the work must be suspended and find out the cause of the problem. Repair of the product should be carried out only in service centers.

It is impossible to work with the device on weight - the master should always select a convenient point of support. Movement cutters are done short and smoothly. The surface of the nail is treated for no more than three seconds (otherwise you can injure the plate and cause burning).

After work with the manicure machine is completed, it is important to bring it in order. To this end, the external parts of the apparatus are cleaned of dust with the help of a soft cloth soaked in alcohol or a special cleaning solution. You can also remove dust with a vacuum cleaner. As for the open mechanisms, they are cleaned with brushes.

The frequency of such activities depends on the intensity of operation of the device. For example, in the salons of the machine must be sent to check once every three months. Independently engaged in internal cleaning is prohibited, it should be carried out only by a specialist.

After the theory has been studied, you can begin to use a manicure machine. In order to do hardware nail treatment at home, you should perform some actions step by step.

• First you need to pick up all the necessary attachments and prepare the skin of the fingers for the procedure. The cuticle can be removed by cutting or impregnate with softening oil and push back with an orange stick.
• Then a medium-hard diamond cutter is attached to the handle and the skin around the nails is processed. At this stage, it is important to monitor the sensations: if it is felt that the nozzle removes a small layer, then it is recommended to replace it with another (with greater abrasiveness). Also, using a diamond cutter polishes the cuticle area.
• The next step will be the formation of the nail plate using a trapezoidal or cylindrical cutter. Above the fingertip, be sure to leave a minimum length of 2 mm.

• Then the machine is used to polish the nails - this should be done carefully so as not to damage the horny surface and not leave scratches on it. The nozzle should perform movements in different directions and not linger on one section for more than a second. The procedure is completed by cleaning the plates from dust and processing them with oil. Manicure can be supplemented with simply colored lacquer or decorate with an unusual design.

In addition, the device is ideal for removing the gel coating. Terms of use of the machine in this case are similar. The work must be carried out consistently and carefully, ensuring that the device does not overheat. However, it is necessary to take into account the fact that during the cleaning of the gel there is a lot of dust, so the machine will have to be periodically cleaned with a vacuum cleaner.

The market for nail products is represented by a huge selection of hardware devices. Models of manicure machines differ in size, weight, design, price and manufacturer. At the same time, the latter plays a huge role in the purchase of a product, since it guarantees the quality and duration of operation of the device.

• Vitek. Cars of this manufacturer are considered the most popular because they are equipped with a full set of nozzles, characterized by high durability and performance. The price of the product is available, therefore, it is suitable for both salon and home use.
• RuNail. This is a professional equipment that comes with different power and configuration. The machine PM-25000 is in great demand among the masters - it is equipped with a multitude of cutters, foot controls and a rotation control. Its cost is average. Great for home marigold care.

• Marathon. The power of this device is 40 W, and due to the high rotational speed of 35000 o / m, the machine allows you to quickly and quality perform any nail processing. Such models can be purchased for both home and salons.
• Nail Drill. Affordable machine, which is characterized by high performance. Its advantage is the presence of six diamond-coated tips. The device can handle not only the nail plate, but also the cuticle, as well as coarse skin.
• IRISK. Excellent machine for professional and home use, which is sold at an average cost. The product package includes four multifunctional nozzles. Model JD 700 is available with a rotation speed of 35000o / m with a power of 35 watts. Due to the high performance using the device, you can make not only a manicure, but also remove the gel coating.

Many of the fair sex, who became mothers or constantly spend time at work, do not have the opportunity to visit beauty salons and perform manicures on their own at home. For the care of handles, they perform hardware processing using a nail machine.

In addition, beginner masters leave good feedback on the fact that the device is easy to operate and it is a pleasure to do manicure with it. However, to get excellent results, you need to practice a little and gain experience.

The housewives are satisfied with the manicure machine and by purchasing the device at an affordable price, they can do a manicure not only for themselves, but also for their girlfriends.Thus, they can simultaneously be engaged in a household and have additional earnings. Appreciated the device and businesswomen who often go on business trips and can not visit the salon on time. Having a portable model, they can safely go on a trip and perform correction on the road.

Thus, a manicure machine is a useful and functional thing.

How to choose a machine for hardware manicure, see below.