Perfect manicure and well-groomed hands - the dream of every girl. It is fashionable, beautiful and just need to look at the level. But it takes time to grow nails to the desired length, therefore, more and more often modern women of fashion resort to using overlay plates. They are called tips. And to attach the plates and decorate them, as well as to repair allows a tool such as glue for nails.
Composition
Nail glue is a translucent viscous gel, designed exclusively for manicure. It is better to use adhesive liquid in the cabin environment, where professionals attach the patch plate and make the perfect design. Or you can try to achieve an impressive effect at home. Convenient packaging and narrow tube tip make it possible to apply light glue directly to the nail, without irritating the skin around it.
The chemical composition is based on cyanoacrylate or another polymer similar to it. Thus, reliable adhesion of your own nail with tips is achieved. It is believed that, in addition to the main action, the glue does not allow ultraviolet to dry the plate, protects it from other harmful effects. Exfoliating agent and panthenol, as well as strengthening components and antioxidants, retinol palmitate, are added to the polymer as an additive.
Top manufacturers
- Coo-Coo-City. This tool, consisting of two components, is well suited for sticking to the decor. Capacity - 25 ml. In order to paste the rhinestone, break off both tips, mix the components in equal shares. Spread on the nail and fasten accessories.
- ORLY. The repair kit contains a glue brush, silk and powder, as well as a grinding block.
- Nail Glue. It is considered one of the best tools estimated by professionals.
- KODI Professional. Contains 10 g per pack, suitable for tips.
- Kiss Brush On Nail Glue. This view provides instant grasp. It is applied with a brush, firmly holds false nails and foil.
- RuNail. Hypoallergenic and safe, odorless. Meets medical standards.
How to stick artificial plates: instructions for use. As a rule, the glue comes in a set with patch plates. At home, you will need tools, lint-free wipes, degreasing agent, deep dishes for hot water.
- Artificial plates covered inside with a degreaser. Excess sawn, adjusting to the desired size. Tips should be wide enough to completely hide the natural surface of the nail plate.
- After removing the remnants of the old varnish from the nails, the cuticle is scraped with scissors, then you can proceed to gluing. To do this, open the glue and quickly apply it, then attach and hold to the connection.
- If you make a mistake, and the glue had time to grab, hands are dipped for some time in hot water. When the tips come off, you can remove the softened glue with a solvent. Do not rasp, so as not to damage the surface. Then repeat the procedure again.
We fix rhinestones
To do this, apply a pattern to the nail of the pattern or pattern that you like. Elements are fixed in the holes left on the template. Rhinestones are placed with tweezers, and the glue is applied drip with a thin stick. You need to think about the arrangement of the rhinestones in advance, then fix them in the holes one by one with glue.After the final coating is applied, the decor is firmly preserved on the surface. Best for rhinestones use two-component adhesive gels. They dry more slowly, making it possible to shift the elements until they form the desired pattern.
How to use for repair
In addition to working with tips, glue is used to repair their or artificial nails. Also using the tool attach rhinestones, lace, foil and other accessories. Nevertheless, the main purpose of this polymer is urgent repair. Fragile nails are not always able to protect against the appearance of cracks. A hurt nail often breaks off close to the edge and near soft tissue. A sharp edge can damage them and cause bleeding. Therefore, for a broken marigold and manicure around the glue will become an indispensable means of recovery. The adhesive will harden, while maintaining the appearance of the manicure, until the original length is restored. If the extension is made with acrylic, there will be no problems. For gel extensions such a tool is not suitable.
It is especially important to follow the manicure if the plates are almond-shaped or pointed. This applies to both natural and artificial nails.
To repair the nail, you need to do the following.
- The broken place should be buffed out so that all roughness disappeared. The tool is a bar with a high abrasive surface that polishes the nail to shine. Apply a variety with a maximum degree of abrasivity - over 500 grit.
- Put a special silk material and put glue on it. This can be flax or artificial fiberglass.
- Put some powder on the scrapping line.
- Wait until everything is dry.
- Sand and level with a nail file.
- If the accessory falls off, use the nail stick. Holding the element, it is enough to drop to the place of attachment of the composition.
Replace the glue, manufactured by manufacturers specifically for manicure, nothing can be. Neither Moment glue nor Super will work: they are harmful and are not intended to interact with human skin. It is then not possible to completely remove such reagent. Moreover, health can be damaged, an allergic reaction is possible. It is advisable to wear gloves, even using glue designed for manicure. If you urgently need to attach a plate, high quality transparent varnish will do.
Removal from the nail plate
If there is a need to urgently remove the lining, this is a simple procedure, as tips are easily moving away from the nail plate. The main thing is not to damage your own nails, to completely remove the remnants of the adhesive gel that holds the tips from them. Glue can be removed from the nails using only special means. Requires the presence of manicure instruments, as well as auxiliary cosmetic compositions:
- discs or wadding remover;
- liquid composition containing acetone, solvent varnish;
- special tool for detaching tips;
- cream and foil.
The first used tool to remove tips. This liquid is applied, then, removing the false nails, proceed to cleaning the natural surfaces from glue. In places where the pad was attached, the most frozen gel remains. These lines require stripping with an abrasive nail file. Of course, you need to polish your nails carefully and carefully so as not to damage them. The next stage is to warm up your hands in warm water. Water is boiled and poured into bulk dishes, deep enough to immerse both hands there. As the water cools, it contains a nail polish remover that needs warming up. In warm form, the tool will work more efficiently.
The next stage is to warm up your hands in warm water. Water is boiled and poured into bulk dishes, deep enough to immerse both hands there. As the water cools, it contains a nail polish remover that needs warming up. In warm form, the tool will work more efficiently.Warm up hands for at least 10 minutes, apply cotton pads soaked in nail polish remover to contaminated areas on nails. In order for the cotton to hold, use a fixing foil. After 15–20 minutes, the discs can be removed and the nail plates can be wiped with acetone again. The most difficult part of the procedure is over. It remains only to hold your hands in warm soapy water, finally removing small remnants. Soap with water is used again, putting his hands under the flow of the stream. Now comes the turn of the emollient cream or nourishing mask for the skin of the palms.
Completely remove the glue without damaging the nails, will not succeed. Especially if you often resort to overlapping tips. But with complex care with the help of special baths and regular use of moisturizing and nourishing hands will remain in excellent condition.
How to stick nails, see the next video.