Cages for wavy parrots: the choice, arrangement, installation and care

Before you start a wavy parrot, you should think about the place of his residence. The cage for the feathered must correspond to its physiological needs and active life. Since the bird spends most of its life in this "house", the choice of housing should be taken responsibly.

On the modern zoological market, you can choose a cage for a wavy parrot or for a couple from a wide range of offers. For sale buildings for birds, equipped with towers, passages, unusual roofs, balconies and decor. Such "palaces" look attractive, fit perfectly into the interior, but may be impractical for a parrot.

For the feathered pet is to choose one a version of the dwelling that will not scare him away, will not create difficulties during flights and bird activity, and will also be easily cleaned.

According to bird watchers for the feathered pet It is worth choosing a rectangular cell. The corners that are in the design have a beneficial effect on the psychological state of the bird, since in these places the pet will be able to hide in case of danger. A flat roof can be an additional playground for the parrot, so an elongated design will be the best option for the wavy pet.

A round-shaped cage doesn't quite fit to parrots, since, despite the decorative and interesting look, for the feathery, it will create an erroneous illusion of space and endlessness. It is also worth noting that the curvature of the walls will become an obstacle during climbing and will create a lot of obstacles during movement. Structures that do not have a specific form are considered unhygienic, since they are very difficult to clean.

One of the most important criteria when choosing a home for a wavy parrot is its size. The minimum dimensions of the cage are considered valid only if the bird will be able to free flight, and the house itself will be used only for food and rest. In a situation where the feathery is constantly in the cage and does not fly out in order to stretch the wings, it should not acquire a home with small dimensions. The minimum size of the free-flying cage is as follows:

• length - 0, 4 m;
• height - 0, 3 m;
• width - 0, 25 m.

For two pets the house should have large dimensions:

• length - 0, 6 m;
• height - 0, 4 m;
• width - 0, 3 m.

Calculating the dimensions of the dwelling for a parrot, you should pay attention to its size. For a large bird, it is worth picking a cage, the length of which is 5 times the length of the pet itself.

Experienced ornithologists advise buying for pets or making their own all-metal cages. The reason for their popularity lies in good wear resistance, sturdiness and optimal hygienic characteristics. Among the popular parrot houses are the following:

• copper;
• copper with zinc coating;
• wooden;
• chrome-plated and nickel-plated stainless steel.

In the case of a poor-quality assembly of a galvanized cell, detachment of the metal layer may occur, and this threatens to poison the feathered one, which can eat the fallen part. The wooden cage does not cause the difficulties described above. In a dwelling made of wood, the bird feels warm and comfortable. The safest breeds are linden, maple, willow, beech, apricot, birch.

It is strictly not recommended to place parrots in cages from coniferous wood, aspen, acacia, chestnut and oak, as they contain elements that harm birds. It is also worth remembering that the bars of the cage should have a diameter of 1-2 mm. In order for the birds not to gnaw the house, they should put inside the twigs or pieces of bark. The stainless steel, but without a paint and varnish covering will become worthy option of material of a cage for a parrot.

The choice of the cage and the conditions of the wavy parrot have a direct impact on its health and activity, therefore the place for breeding and residence of the feathered must be suitable for him in all respects. If the parrot cage is chosen poorly, then staying in it can negatively affect its health, health, development, appearance, and can also cause the death of the bird.

In order for the living of the bird not to bring it into a stressful state, it is worth buying a cage, guided by the following parameters.

• Pallet presence, it contributes to the ease of cleaning the house.
• Existence of a floor lattice. Thanks to this element, the parrot does not eat litter and fallen food.
• Suspension feeders.
• Arrangement boards in the lower part of the structure. The bumpers help collect garbage that scatters, and also prevents it from scattering around the room.
• The absence of dangerous gaps in the lateral parts of the cell. They can be traumatic for birds.

Buying a home for a pet, you should pay attention to the number of doors and their features. Doors can open as follows:

• rising up;
• lowering down;
• plowing sideways;
• up and down.

It is also worth noting that the doors should not sag in the hinges, make a creaking sound, but should easily open. The main thing that the owner of the feathered pet should not forget is that you should not buy a small cage of irregular shape.

If you want to make a wavy parrot in his apartment, the owner must equip the cage, arrange its contents correctly and make its design not only comfortable for the tenant, but also as close as possible to its natural environment. In the cage of this unpretentious bird should be all that she needs for life.

• Perch. The parrot usually spends a lot of time on them. They are bought separately or in conjunction with the cell. If the perch is smooth, then it can cause rubbing of the corns on the feet of the feathery, so you should prefer plastic poles with sandpaper.

A worthy version of this device will be a wooden pole with a diameter of 15-20 mm. The number of perches in one cell usually equals two, they are set opposite each other.

• Feeders - These are containers made of plastic or ceramics, they are fastened with the help of cellular rods. The ideal number of feeders in one house - three. The first is for grain and dry food, the second is for minerals and additives, and the third is for wet food, that is, cereals, fruits and vegetables.
• Drinking bowls have become a worthy substitute for cups or water bowls that the bird easily knocks over. For one or two individuals in a cage, one automatic drinker is enough; if there are more birds, then you should put two.
• Mineral stones, chalk, pumice. These hard objects are intended for turning the feathering beak.
• Toys If the pet is only settled in a new home, then you should not clutter up the cage with a lot of entertainment. After mastering a new house, you can put several toys in it. As an option, swing, spinning balls, a mirror, a bell are used.
• Branches must always be present in the cage of a wavy parrot. Feathered uses them not only as entertainment, but also for sharpening the beak. The only thing worth remembering is that you cannot put a sprig from a conifer tree in a parrot's house, as it may harm its health.
• Paper. On the pallet is to put a paper sheet, which helps to absorb unpleasant odors. Not recommended to use newspapers, as they have a rather aggressive texture.
• Kupalka. If the dimensions of the cage allow, then it is possible to install a bathing in it, which looks like a plastic box with water poured at the bottom. The device must be securely attached to the cell bars.

Having defined the parameters of the cage for the wavy parrot, you can proceed to its independent production. For this job you will need to acquire:

• tape measure;
• a sheet of plywood;
• a pencil;
• a sheet of paper;
• pliers;
• nails or screws;
• sandpaper with a small fraction;
• wood glue;
• a hammer;
• nippers;
• metal mesh, whose cells are 1-2 cm;
• construction stapler;
• screwdriver;
• wooden slats section 2 to 5 cm in the amount of 12 pieces;
• metal profile;
• a file;
• screwdriver;
• corner;
• canopies.

To make a cage with dimensions of 0.6x0.25x0.35 meters, worth doing the following.

• Plywood is cut from the bottom of the sheet. in the form of a rectangle with dimensions of 0.6 by 0, 25 meters.
• Along the edges of the bottom rails are packed, which will serve as sides.
• From previously prepared rails cut 3 parts of small width along the length of the bottom. These elements will become grooves for the cell, they are attached to the base with glue.
• From metal profile a sheet is cut for the pallet, the dimensions of which will allow it to enter the grooves. The front part bent at 90 degrees will facilitate the cell cleaning process.
• 8 blanks are cut from the slats, by which the mesh walls will be fixed. Their length should be equal to the height of the cage.
• With the help of a screwdriver holes are made into which parts of the grid will penetrate.
• Wood blanks they are greased with glue and sealed together for a total of 4 wooden corners.
• Part of the grid is measured and cut, which is subsequently fastened with the help of a construction stapler on glued planks.
• Next is the top of the cell. Rails of wood are attached to the sides, and they must be pre-drilled holes for mounting the mesh. The same rail should be mounted in the center.
• On the back side is to attach canopies, then install the roof for the house. One half of the roof will open, for this it will have a latch.
• In the front wall is to cut a hole for future doors. According to its size, the rack frame is made, and the grid is stretched on it. Loop and lock made of wire.

The place where the parrot cage will be located should be well lit, however, direct sunlight should be avoided, as this can cause heat stroke. You should not have a cage with a pet in a room where there are sharp temperature changes and drafts. It is undesirable to put the design in the kitchen, because there are a lot of fumes, strong odors and high temperature, which can adversely affect the health of the birds. In the presence of adverse conditions, it is better to rearrange the pet's home.

Not far from the cage with a parrot no poisonous plants, scented lamps, candles. At night, the building can be covered with a cloth that is well breathable. With this action you can adjust the length of daylight for the bird. It is forbidden to cover the house during the day, as this may cause stress.

The wavy parrot cage is required to be kept clean and tidy, while general cleaning she needs every 7 days. Also do not forget that the paper, which is lined with a pallet, should be changed every day. Pet feeder and drinker must be washed using a sponge every day before filling. Sand and sawdust are replaced at least once every 7 days.

About what should be in the cage of a wavy parrot, see the following video.