Pattern and tailoring bag-backpack

To date, the most popular among the many accessories won bag backpack. An indispensable thing not only in the conditions of the city, but also for various trips. It is not a problem to buy a bag-backpack, but for those who love needlework it is much more interesting and more pleasant to sew it with their own hands, especially since the choice of materials always remains for the needlewoman. Therefore, the accessory sewn with his own hand is distinguished by an individual design, without losing its functionality.

To manufacture such a transformer, it is necessary to prepare:

• flizofix;
• 55 cm x 140 cm neoprene cut;
• a piece of leather;
• rag flap width 160 cm and a length of 45 cm;
• 35 cm zipper;
• Three buckles:
• as well as threads, pins, scissors, a ruler, and two finished handles with carbines 85 cm long.

Draw a pattern of three parts. Two rectangles measuring 33x23 cm and 43x13 cm, a circle with a diameter of 28 cm.

Next steps:

• From neoprene, matting and glue we cut out one round piece and glue them with an iron by placing a circle of glue between neoprene and the mat. We do the same with parts of 43x13, cut from leather, neoprene and glue. In a rectangular glued workpiece, we perform a side seam and attach it to it, departing from the edge of 1 cm, a circle.
• Cut out two pieces of 33x23 cm of neoprene and matting, which we sew together on the long side. We fasten the zipper to the resulting two parts, without bending the cuts, to which we glue, and then we sew two strips of leather measuring 2x44 cm.
• Now we grind off the side seams of this blank and attach two buckles to different ends of the zipper. To attach the buckles to the bag, cut two pieces of leather. Each part consists of two rectangles measuring 6x45 cm, interconnected by a 2x2 cm jumper. We insert the buckles into them and fix them with glue and iron, and then sew them along the side seams.
• For the third buckle, you need to cut out a 2.5x5 cm loaf of leather and sew it to the blank of glued parts (bottom of the bag). Now we connect the bottom and top of the accessory by stitching from the wrong side, joining the bottom side seam with the top seam. Bag is ready.

For the baby, you can design and sew a beautiful backpack, transforming with the handle in the bag.

We will need:

• two types of fabric: monophonic and with an ornament;
• stern and synthetic winterizer for sealing;
• cord in the color of a single-color fabric and four zippers.

1. From the fabric with an ornament we cut out seven rectangular blanks. Two pieces for a back pocket 25x25 cm, for a front pocket 16x25 cm, for side walls 15x32 cm and one blank 8x130 cm for a fabric strap over the shoulder.
2. We cut out of one-colored fabric one by one blank for the back and front wall of the backpack 25x32 cm. Duplicate parts for two types of stitches with dimensions of 8x15 cm and 8x10 cm, as well as for a backpack belt 8x80 cm.
3. We will sew the upper part of the backpack from two 25x25 cm blanks, in which we cut off the corners of 7 cm on each side.
4. For the bottom of the bag, we draw an oval 28 cm wide and 16 cm high.

• For sealing the lid, bottom, two walls, stitches and backpack straps we cut out the stern from one detail. Additionally, condense the bottom and back wall with padding polyester. We lay three blanks for the bottom between each other and set aside.

• To the blanks for pockets sew lightning on one side. Sew pockets to the front and back of the backpack, from the front. Gently align the pocket, jokes to the wall. On the upper half of the zipper we put a braid and attach it to the main workpiece. It turned out two blanks with pockets.
• To the back wall we sew the side sealed parts, we overlay the cuts. At the sheave blanks, we twist the cuts inwards, fold in half and sew along. In the ready loops insert the frame and sew to the back wall.

• Now we are preparing knapsack belts. To do this, we twist the cuts from the long sides inwards, then fold them in half and iron both parts. Insert a zipper between them and stitch.
• We grind the workpiece, consisting of a back wall and two side walls with a front wall and a bottom. We unfold and attach to it a strip of 8x80 cm, designed for lace with previously bent edges, and, departing from the top edge about 5 cm.
• At a backpack cover we sew details, we iron, we insert the top half of a fastener, we decorate, and then we sew to the main preparation together with backpack straps. On the sides we attach loops with inserted semirings.
• We insert the second half of the clasp into the front wall. Now sew the lining, adding a pocket with a zipper. Put the finished lining inside the backpack, bending the upper cut 2 cm, and retreating about 5 mm from the edge, we sew. Then we retreat another 5 mm and make a line along the lace strip.

• We insert the cord with a pin inside the product, and the ends are pulled through the locking device, the ends are tied with a knot.
• Now we sew a shoulder strap. Bend the cuts inward, fold in half, iron and punch on the front side.
• At the ends set the buckle for the regulation of the length and carabiner.

Bag is ready.

To go to the beach, you can stitch a comfortable and functional backpack with a bear-shaped rug.

To make this interesting and fun beach accessory you will need:

1. Two terry towels size 70x140 and 50x90.
2. The fabric which is not passing moisture 100x150.
3. Cuts of fabric of various size for pockets, paws and the head. For the upper pocket and the lining side of the ears - 50x100 cm, lining fabric for the paws - 50x50 cm and for the lower pocket - 50x90 cm.
4. And also need a backpack tape - 270 cm, zipper - 50 cm, semi-automatic clasp for the tape - 4 pieces, velcro - 50 cm.
5. In addition, you will need threads, scissors, pins and a marker for fabric.

• We cut out a muzzle from a cut 47x37 cm. On paper we draw, and then we cut out eyes, a nose, ears. The resulting parts are applied to the fabric, cut and cut. We receive the received preparations to a head by a figured seam.
• Then we cut out two details from the lining fabric and one of the identical size from the fabric that does not let moisture through. We sew parts of the lugs with lining fabric and set aside.
• Pin pins belt belt on the details. Sew in one of the lining blanks pockets and loops with a half ring. We hang lightning between the lining and the front parts. For convenience, sew pieces of rep tape. We stitch the lining blanks around the perimeter, folding them with the front sides. Sew on the face ears.

• Cooking parts for paws. To do this, we cut out four parts for each paw: two for the lining, one main one from terry cloth and one from the fabric that does not let moisture through.
• We sew the main terry and one lining, folded face up. Then we fold the sewn parts face up and make another line. We place the second lining blank face up, and on it is stitched blank with terry side upwards, retreating from the edge of 2-3 cm and a blank made of fabric that does not let moisture face down.We pin all the details with pins and draw an oval shape for the paw from the bottom edge. We cut and sew around the perimeter, do not touch the upper cut and turn out. It turned out a paw with a pocket. We do the same with the remaining three legs.

• Take the prepared towel 70x140 and, putting the muzzle to the smaller side, cut out the neck, removing from each side 2 cm. Then, cut to the size of the cut body from a fabric that does not let moisture through. On a towel, lay the paws face down, and on top of the workpiece from a fabric that does not pass moisture, and we grind around the perimeter, then turn it over.
• To the back of the satchel we pin buckles on the tape, docking with buckles on long belts. Put a 15x47 cm lining on top and grind down the long side. On the face lay out the lining face-down size 35x47 and sew. Then sew the contact tape to the underside of the lining details. When tucking in the bag-backpack of lining parts, the attached contact tapes should coincide with each other.
• We unfold a part of the bag with a short lining; we put a rug and lining fabric 25x47 cm in size, face down, on top. Combine sections and grind parts. Now combine the sections of the pocket, which will be a rug, and grind off on the sides. Turning and stitch the bottom of the lining. Sew a bag in a circle.
• Insert the pocket into the bottom of the bag and remove the towel mat into it. Fix the bottom with a contact tape.

Bag is ready.

How else can you stitch a backpack bag, see the next video.