Patterns evening dresses

Probably, many faced with such a problem that magazines for cutting and sewing are full of a variety of patterns of everyday and business attire, and evening models are very few. As a rule, they are boring and do not always follow fashion trends. On this occasion, a collection of patterns of evening dresses from the world's couturiers has been created for you. Sexy dress mermaid, A-line with a deep neckline, classic straight and disco short - these outfits will always be relevant.

We can say that the mermaid is the most interesting style for designers. Tight-fitting silhouette and flared skirt remain unchanged, but what will be the bodice and the "tail" depends on fantasy.

We offer you a simple model on the straps and with a light drapery on the bodice, which will give a small volume of the breast and focus attention on the décolleté area, a wide belt will further contribute to this.

1. Add the length of the skirt you need on the basic pattern and flare it. The pomp of the tail depends on the flare width.
2. Draw a neckline and armhole. Close the dart.
3. The bodice is cut off, so put it down from the neck 15-16 cm and model the belt with a height of 8-9 cm (see the pattern).
4. The belt is ready, we will cut it off.

In front of the bodice, cut along the lines and extend by two cm (see picture). The distance between the parts can be increased to 3 cm, if you want the number of assemblies to be large.

Similarly, the front of the dress model back.

1. To drape a belt you need a rectangle with a width equal to the width of the front part of the belt (detail 2). Its height is 2 times greater.
2. Stitch a rectangle on the sides, gently evenly pull it to the width of the belt in front. Sweep them together and roll. Then tack drapery on the upper and lower cuts. Then sew as a single-layer part.
3. For the bow also open two rectangles. Their width in finished form should be equal to the width of the front part of the belt, and the length - 75 cm.
4. Sew all the details of the dress. Sew the finished elements of the bow into the mermaid's sides and tie it to the bow.

Elie Saab at one of the shows presented a red chiffon dress with the illusion of nakedness.

The model's cut is rather complicated, so we’ll take a close look at the sewing steps.

Required for work:

• lining fabric in skin tone;
• Chantilly lace;
• chiffon:
• lightning.

Please note that you can create an evening dress pattern yourself with 2 options:

• draw on graph paper and then cut;
• use the program RedCafe.

The program has a handy feature that separates the lines by color, so you can see the location of all the lines.

The modeling stage is over, we start to work with the fabric.

• Print the pattern and fold it into a single unit, combining the corners.
• Then shift the pattern onto the lining fabric and circle the lines with soap or a piece of chalk.You can use the disappearing marker.

Sew stitches and side seams on the machine without bartack and large stitch width. This sweeping away is needed to check the desired fit of the bodice on a mannequin.

Lace out the fabric according to the pattern of the lining fabric. Fasten it to the sides and stitch the darts, after cutting off excess lace over all cuts.

Darts at the waist stitch and iron to the center. Make sure that they are not noticeable on the lace from the front.

At this stage, the sequence of pritachivaniya relief bei. The pattern should be beautiful, without overlapping lines. And to understand which line will be the first, make a sample. For contour lines, take a slanting tape from the knitwear. It is without shine and easy to work.

Knit pint handle cut armhole and neck. The neck, which passes into the incision on the back, process the bake, set in a reversal.

The semi-sun skirt consists of a dense lining and transparent chiffon.

First you need to calculate the radius of the waist circumference (Off). The radius formula will help you with this: R = (Otsh2) / (2x3.14).

Lower radius make the desired width.

Work with large cuts has its own characteristics:

• Make sure that there is no marriage, stains, lines on the fabric;
• Try to buy material in stock, so you do not overpay.
• Keep in mind that chiffon with natural threads may shrink, so do a wet-heat treatment on a sample of matter.

Get rid of the edge. After making the cut, tear it off along the upper and lower edges of the fabric.

To assemble the skirt along the waistline, lay 2 lines 1 cm apart and gently pull to the desired width. It is better to take threads reinforced, they are resistant to strong tensions.

Sew a skirt with chiffon lined. Process slices on the overlock. Attach the received bottom to the bodice of the dress on the mannequin. Eliminate inaccuracies if necessary.

Further open the belt. Its width in finished form should be 3 cm.

Insert a zipper into the middle seam on the skirt.

At the final stage, combine all the details. Belt stitch to the skirt with ruffles on the bottom edge, and then - to the top of the dress.

Evening version on one shoulder allows not only to move away from the usual styles, it has several advantages, such as practicality. Pattern dress will be relevant for any occasion. The solemnity of the model will depend on the selected material, while the length can be adjusted to your liking.

1. On the pattern-based, cut the chest and shoulder darts.
2. Shoulder slices align.
3. Tuck close and shape the neck.
4. Model backrest.

Model a tight-fitting sleeve and shuttlecock.

Another versatile and practical with a number of advantages is the A-line evening dress. It should be an integral part of the wardrobe, especially a spectacular red dress like Kim Kardashian.

Armed with the basic base of the dress that fits your size, proceed to the modeling. The model consists of 2 parts, so the top and bottom will be modeled separately.

First you need to make a belt. Put 7 cm along the back and front sections, then connect the points with a line. Belt with a skirt cut.

It turned out the back and 2 shelves. Now move the shoulder tucks down

Make the straps 2-2.5 cm wide. 4 cm was added along the bottom of the bodice, because the darts are translated. Lay them in folds.

The belt width must be 7 cm. And the length is determined by the formula:

• for the upper cut - 2x + 2 y, that is, the length of each detail of the bodice along the bottom cut is summed. Do not forget to add indents in the area of ​​the side seams.
• for the lower cut - a + b, the length of which is equal to the waist girth.

• On the waist, remove the darts.
• On the skirt make breeding. You should draw the cut lines (in the figure they are shown in red) on both panels of the skirt.
• Spread the resulting items to the desired value.

The modeling of the skirt ends with the design of the waist and the cut of the skirt with a smooth line. Also set the desired length.

It's time to put the pencil and cut out the details. Open up for the bodice 2 parts, 1 belt and 1 panel for the skirt.

If the fabric is not dense and the bodice is translucent, then make it double-layered.

Do not forget about allowances - 1 cm and hem. Sew a secret zipper into the side cut.