Making rings on the car for the wedding, their creation and installation

In the organization of weddings with the observance of traditions, one of the key roles is assigned to the wedding procession. In it, the newlyweds with the guests will go to the registry office, take a walk to important places with a photo shoot, from where they will come straight to the banquet venue. To celebrate the convoy stood out in the general traffic flow on the wedding route, it is decorated with various accessories. In this case, special attention is paid to the decoration of the car of the bride and groom.

There are lots of variations in the design of the newlyweds' car, but in many cases it is decorated with wedding rings. - a traditional attribute of the ongoing celebration. Rings for a wedding car can be purchased in the bridal salon, made to order or made yourself, showing a little imagination and creativity. The following describes the design options for this type of autodecora, its independent creation and how to install it on the wedding crew.

In ancient times, the bells on the wagon of the young people adorned the bells, the sound of which resounded throughout the county, reporting the approach of the newlyweds and scaring off evil spirits. The traditions of the “wedding train”, as it was called by the Slavs, are still alive, with the only difference that cars are used instead of horse carts and bells changed rings.

Wedding rings on the car - this is a classic decoration, for decades not losing its relevance. The reason for this phenomenon lies in the symbolism of the accessory itself and its meaning for the wedding.

• The interweaving of the rings testifies to the close connection of two people who have decided to walk along the path of life side by side, as well as to unite the two fates into one.
• The ring, which holds a closed circle without beginning and end, combines the images of eternity, unity, integrity and infinity. The latter implies the inviolability of love between newly-wedded spouses, which will live forever.
• The ritual of the exchange of rings between the newlyweds serves as tacit evidence of the conclusion of a marriage union.

When making cars rings should follow a few rules.

• Decide in advance on the place of installation of jewelry. When using a rental car, you should ask the owners about the limitations of how to decorate it. Involving the TS of acquaintances also requires a discussion of this issue, as the zealous attitude to his “iron horse” is typical of the overwhelming majority of car owners.
• Deciding to place the rings on the hood, it is important to ensure that the decoration is not for the driver cause a limited view of the road and objects that impede movement. After all, it is a matter of safety of passengers of the vehicle.
• Ideally, the design of the car should show one, maximum two accent, focusing the attention of others. Rings on the car - this is a vivid example of accent decor, which does not need the company of another decoration that catches the eye.
• The main accessory and accompanying decorations should have been designed in the same style of celebration. As a result, the design should turn out to be festive, while remaining balanced in shape and color, and not be associated with a fairground show.

You can use this autodecor. as an independent decoration or in combination with other accessories in the form of:

• flower arrangements;
• fabric hearts on the grille;
• ribbons that adorn all auto escorts;
• non-stick labels;
• themed flags;
• balloons;
• fabrics for decorating the hood, which is twisted and fixed at an angle by a tick, one side of the cover is covered with textiles, assembled with a fan, have beautiful folds, etc .;
• colors on the door handles;
• decorations on the side mirrors.

Let us dwell on the materials used by wedding designers to decorate the rings themselves, in order to maintain the chosen style of the celebration and create a truly festive atmosphere.

The use of figures of white swans at weddings is not accidental. These noble birds, personifying grace, beauty and grace, are inherent in creating couples for life and raising offspring together. For this reason, they are considered a symbol of marital fidelity. Not to mention how romantic and attractive the swan couple looks, bending their heads to each other, when between them, thanks to the natural plastic, a single heart is formed.

The swan and the swan are the ideal decoration for the car heading the wedding procession - the newlyweds' cars. Their figures are used as a separate decoration for the car of the bride and groom or they complement the rings: such compositions always look very impressive.

An interesting and unusual look is a combination of small rings and large swans sitting in the back. In such cases, the execution of the nest-stand can be very different in the form of a flower composition, a lush wreath of roses or lilies, a single large flower, with or without the addition of greens, cloth (satin, chiffon, tulle, organza), bows, ribbons, artificial pearls .

Another option involves the combination of large rings and small figures of swans, which are located inside each circle. Such a composition can be erected not only on the roof, but also on the hood of the vehicle, adding, if desired, other accessories. Instead of a pair of swans on wedding carriages, a dove with a dove is often flaunting as a symbol of family happiness.

The combination of rings and colors is a win-win solution that has long become a classic. The budget option involves the use of artificial plants that are indispensable in the autumn-winter wedding season, as they are not exactly threatened by the loss of the original attractiveness due to the vagaries of nature. The cost of living compositions is somewhat higher, but the crew of the newlyweds, cleaned with fresh flowers, becomes expensive and respectable.

When choosing a floral assortment repelled from the design solutions rings. When satin ribbons were used in their design, the plants are chosen in a similar or, on the contrary, contrasting color range.

If it is planned to decorate young cars with decorations from fresh flowers, then living plants should be present in the design of the rest of the wedding motorcycle car, at least to a minimum. It can be boutonnieres or single flowers on door handles and mirrors, flower garlands and small size compositions on the hood. As a rule, they are made from the same flowers as the bridal bouquet.

In general, flowers for florists are an inexhaustible source of inspiration. They are used to create the most different types of wedding avtodekor - figures, canvases, garlands, letters, which are suitable for decoration of classic and original themed weddings. A good example is fantastically beautiful rings on a car in the shape of hearts made from fresh flowers and greenery.

Satin ribbons are good to use as a decorative outer winding of the rings and for fixing them to the surface of the hood or roof. They also serve as material for creating roses with different thickness of the assembly, which serve as an additional decor. An alternative to satin ribbons for fastening rings to the base can be cuts of light flowing fabrics. Decorative winding can also be made of net-tulle.

Often, wedding processions are decorated with bows, which make the design more expressive. Such decorations look great and as an addition to the main composition of the rings and satin ribbons. These can be miniature spectacular bows with an inset of a fine-meshed floral mesh or large bows of translucent, matte or shiny tulle.

The composition of rings and toys is consistent with the wedding atmosphere. For decorating the crew of young people used a variety of toys. The most popular option - teddy bears in shades of pink or purple colors. One of them can wear a hat-cylinder, the other - a veil: such a pair of cubs looks especially touching and cute. No less popular are dolls of the bride and groom or soft toys in the shape of a heart.

Consider step by step a master class on creating rings for a wedding car with your own hands.

What materials will be needed for creativity:

• PVC corrugated pipe with a length of 2 m;
• a piece of foam 230x450 mm;
• a piece of matter a little larger than foam;
• needles with threads and knitting needles;
• coil of transparent adhesive tape;
• glue gun and scissors;
• ribbons of white, golden or silver color with a width of 2 cm.

Decorate the product will be artificial flowers and miniature bells.

The order of work.

• The corrugated pipe is cut into two parts of different lengths to get circles of larger and smaller diameter. The segments are joined into rings and secured at the junction with adhesive tape.
• Both products are wrapped around the entire circumference with adhesive tape to hide the corrugated surface.
• Ribbon make the outer winding of the rings. When creating each layer of winding, the ends of the tape are fixed with glue for reliability.

• Fasten products to each other: they can be positioned side by side or “twist” in the classical way, when a ring of smaller diameter is placed behind the larger one.
• Attach the design of the rings to the base of the foam with a thread through the through punctures made by the needle.
• The lower part of the base is covered with fabric, wrapped around the edges and sewn with threads. This is done in order to avoid damage to the paintwork of the car by flower decoration.
• They decorate the stand with flowers, arranging them to your liking, but not forgetting that they must mask the fabric well around the perimeter of the product.
• To keep the plants in place while the vehicle is moving, they are inserted into the base and fixed with a glue gun.
• As a testament to the stroke tied to the top of each ring on the bell.

The finished wedding car decorator already has special attachments in the form of rubber suckers, neodymium magnets, eyelets for textile decorations (ribbons, twisted fabric). The magnets themselves are quite powerful, so no additional devices holding the rings are required here.But when using suckers, it would be useful to use tapes for safety, securing them through the eyelets for textiles.

The classic version of fixing rings involves the use of tapes. Products are fastened in different places of the vehicle: they can be put on the roof or hood, attached to the grille or front bumper. In the last two cases, the accessory is simply tied with satin ribbons, tying them with original knots.

A homemade wedding accessory is the easiest and most reliable way to fix it with satin ribbons 4-6 cm wide and 0.5-0.6 m long of a suitable color. The tape will need at least 4. When installed on the roof, they are first wrapped around the rings, making two turns, then pulled through each door and tied to the ceiling railings.

Thanks to such improvised stretch marks, the wedding accessory will withstand any road shaking without any problems and will not fall in strong winds. Deciding to install the structure on the hood using ribbons, they are successively passed through the rings and under the open hood, and then connected inside. Of the remnants of ribbons often make bows for decorating door handles and discs.

Master class on making rings on the machine, see below.