Everyone at least once burned pan. And everyone asked himself the question of how to return her original appearance. Choosing the wrong cleaning methods, you can completely spoil the dishes or spend a lot of time, and the effect will be scanty. In order to quickly return the product to its original appearance, it is necessary to take into account the type of pan when choosing a product.
What can wash off soot?
If food burns when cooked in a saucepan, then carbon is formed, which is difficult and problematic to cope with. To clean the dishes from soot, salted water should be used. It should be poured into a container, heated and boiled for several minutes.
For efficiency, you can add soda to the water. The higher the concentration of the solution, the better. After that you should not drain the water, but leave it until the morning. Then the carbon can be easily removed.
To clean enamelware from carbon deposits should use a brush. It is not recommended to use strong household chemicals with abrasive particles., because they can damage the surface of the product. This will further affect the dish itself.
If there are scratches on the enamel, the dishes will constantly burn, so it is better to throw it away.
After cleaning dishes with enamel from plaque, the surface often has a dark color or yellowish plaque. Bleach will help to eliminate this problem. It is enough to add some whiteness to the water and boil the dishes. But remember that rinsing after the procedure should be thorough.
Many housewives clean the pans from soot using a detergent. It is worth taking water into the container and add a lot of detergent, heat and boil a little. After that you can use a hard sponge to remove carbon deposits from the dishes. This method allows the pan to return to its original appearance.
To remove scale it is not necessary to use household chemicals, you can use traditional methods. Bring back whiteness to help apple cleaning. They must be put in a saucepan, add water and add a little lemon juice. Then boil a little. An alternative to lemon juice can be acid.
Vinegar will help restore the shine to the aluminum dishware. It should be mixed with water, pour over the pot and boil over low heat. But remember that this method is not suitable for cleaning enamelware.
You can wash burnt food from the bottom of the pan with clerical glue.
It is necessary to take a bucket and pour boiling water in which 100 grams of silicate glue should be diluted, and also add soda ash. Next, the solution must be put on fire and bring to a boil. In the tank you need to lower the pot and boil it for about 30 minutes. After the procedure, the pot should be cleaned with a sponge.
Instead of soda, you can use laundry soap. It should be grated for quick dissolution in water.
A layer of soot can be eliminated using normal toothpaste. You can buy especially the cheapest, because the price does not matter. It is necessary to moisten the polluted places and process with toothpaste. After a few hours, the pot should be washed under water using a sponge or brush.
How can you easily clean?
There are many methods that will help clean the burnt pot at home. Inexperienced housewives immediately begin to remove carbon with the help of metal brushes and sponges. This should not be done in order not to completely spoil the dishes.
First you need to remove the burnt food from the dishes. Then pour warm water. The use of cold water adversely affects the integrity of the enamelled coating.
The most popular way is to use salt, as it is in every home. You need to prepare a solution: one liter of water will need 2 tbsp. spoons of salt.
It is necessary to drain the dirty water and pour the prepared solution. Next, you need to put the pot on the fire and boil. The time depends on how much the product has burned. It is necessary to wait for the burnt remains to begin to separate from the walls inside the dishes. When the bottom is clear, remove the container from the heat, drain the water and rinse thoroughly. Next, wipe with a dry towel.
Salt can be replaced with a conventional detergent, but its concentration should be high in water for effective cleaning effects. If glass covers are burned, then different methods can be used.
Ideal use of vinegar or soda. They can be cleaned from soot using soapy water or coffee grounds.
After cleaning the pan from stubborn dirt can remain a raid of yellowness. To get rid of it, you must use vinegar. For one liter of water will require 5 tbsp. spoons of vinegar. It is necessary to completely cover the inner walls of the prepared means and put on fire. Boil the dishes should be from two to three hours.
To get rid of the blackness at the bottom of the pan, you can use the whiteness.
Due to the high chlorine concentrate, it allows you to return the whiteness of the dish surface. In the pot need to pour bleach, so that it completely covers the black bottom, and then boil it.
Often during burning, not only the inner walls of the product are affected, but carbon is formed outside. The reason may be runaway milk, boiled out soup or fat residues. Silicate glue will help to cope with external cleaning.
It is necessary to dilute one glue tube in several liters of water, pour the solution into a special container and place the burnt product there. Put on the fire and boil for about one hour. After this procedure, the dishes will look like new.
To clean the outside of the pan is ideal fine sand. This option will allow cleaning dishes in nature. Sand can be replaced with ordinary soda.
To clean pans from old fat there are many popular ways. It is necessary to take one potato, cut it in half and dip it in soda. Carefully rub the bottom of the dish. It is the juice of potatoes and soda that allows you to remove the raid.
To remove grease from the walls of dishes, you can use tea bags. It should be a dry bag to hold over the old fat. He will immediately begin to dissolve. To clean the outside you can boil in soda solution. On a bucket of water will take approximately 2-3 tbsp. spoon of soda. Then the dishes should be boiled in this solution for about an hour and a half. At the end of the pan to wipe with a cloth.
From jam
If you need to scrub the aluminum pan from the burnt jam, you should also use soda. Dish need to fill with water and add 1 tbsp. spoon of soda, because this tool perfectly softens the carbon and facilitates easy removal. The tank needs to be heated and boiled on low heat for 20 minutes. Next, the pot should be cooled, pour out the liquid and remove the remaining jam with a sponge. If you immediately fill the product with water, the cleaning process will be fast enough.
Delicate methods will be required to clean enamelware from burnt jam.
Do not use soda, because it can damage the enamel, it is necessary to give preference to salt.
On one liter of warm water will need about 8 tbsp. spoons of salt. Prepared solution should be poured into the burnt dishes and put on fire. Boil for about 30 minutes, then cool and remove all carbon with a sponge.
From caramel
To wash the dishes from the caramel, you can use the same methods as for cleaning the burnt jam. To remove caramel from a Teflon product, you need to use a lot of water and add a little dishwashing liquid to it.
For cleaning the aluminum surface is ideal boiling dishes with the addition of silicate glue, soap, soda or citric acid. To remove traces of soot, polish the surface using a few drops of ammonia.
From porridge
Many housewives are interested in the question of how to clean the pan from the burnt porridge. Typically, this problem occurs in young mommies, who, being distracted by the child, do not have time to follow the porridge. Buckwheat usually burns because it is boiled in a small amount of water. The methods described below will help to clear the pans if pasta or beetroot is burnt.
First you need to remove the burnt porridge and let the dishes cool. Next, fill the container with water and add 1 tbsp. A spoonful of salt, heat and boil a little over low heat. After draining the contents, apply vinegar and soda on the sponge for careful treatment of the burnt areas.
If we talk about the metal pan, then an excellent solution is to use a conventional sponge with detergent.
Enamel coated dishes should be poured. exceptionally cold water. Boiling will require 1 tbsp. spoon dishwashing detergent.
To clean a teflon pan, just use water and pour detergent. Next, the product must be left for 30 minutes. Using a sponge, carefully remove the burnt traces of porridge.
From milk
Very often burn pans when boiling milk. To scrub the product, you can use these tools:
- Activated carbon. It is necessary to take 8 tablets and chop them thoroughly, then sprinkle the burnt bottom. After one hour, pour the dishes in cold water and leave for another 20 minutes. After rinse the pan under warm water.
- Milk serum. This tool is suitable for cleaning any type of dishes. It is necessary to fill the burnt bottom with serum about 3 centimeters higher and leave for 24 hours. Then wash with detergent.
- Coffee grounds. It is necessary to cover the bottom of the dishes in the coffee grounds and leave for three hours. Next, using the hard side of the sponge to clean the bottom of the product.
Clean metal surfaces
A large number of pots made from metal. The most popular dishes are made of steel, because it burns very rarely and is characterized by ease of use. The cast iron pan is also not prone to burning, but is characterized by high weight.
To wash the metal surface from the burn, you can use the usual dishwashing detergent.
It is necessary to fill the bottom of this tool and give time to soften. When the crust is soft, you must remove it with an abrasive sponge.
To eliminate stubborn soot, you can use traditional methods:
- Quite a common method is a porridge made of water and soda. It should be applied to the place of burning, and after a few hours, clean it using a hard washcloth.
- Remove the burn can be using boiling. Water should be poured into dishes and poured over 2 tbsp. spoon of soda. It takes just 15 minutes to soften the dirt.
- To clean steel utensils outside you will need a container in which the burned product will fit. In the dishes you need to take water and add vinegar in a ratio of 1: 2. The solution should completely cover all the burnt areas of the dish.Next, you need to boil, remove from heat and give time to thoroughly soak. Additionally, make a powder of 200 g soda and half a glass of salt and sprinkle with vinegar. This option acts as a scrub.
Often housewives buy pans made of aluminum, because they practically do not burn. But if there is such a nuisance, then it is quite difficult to wash them, because the burnt food very quickly eats into this metal.
For a start, aluminum dishes must be put on a wet cloth. It is enough to wait half an hour and you can break the cleaning process:
- In the pot you need to pour water and add soda ash. Next, you need to put it on the fire and boil for 30 minutes.
- You can prepare a solution with soda and dishwashing detergent. It should be a consistency of thick cream. In the solution should be added 2 tbsp. spoons of hydrogen peroxide. After the solution should be applied to the burnt places and leave for a few minutes. After that, you can proceed to cleaning the pan from the burn with a metal scourer.
- The most effective way is a solution prepared from 1 tbsp. spoons of soda and silicate glue. Boiling time is half an hour.
After removing burnt food from a metal pan, a dark patina may remain. To eliminate it, you must use one of the following methods:
- You need to make a cleanser, where 300 ml of water will require 15 grams of borax, 15 drops of ammonia solution. This mixture should be applied to the darkened areas and leave for half an hour. After the pot, rinse thoroughly.
- The pot can be poured with yogurt or pickle, and then left for one hour. The product will look like new.
Clean the enamel
Enamelware should be cleaned immediately after burning. If you leave it for 2-3 days without cleaning, and only fill it with water, then it will be simply impossible to restore it.
First you need to wait for the enamelware to cool completely, as the enamel deteriorates during sharp changes in temperature conditions. In a container with damaged enamel food will always burn.
After cooling, you need to use one of these methods:
- Sprinkle the burnt bottom with salt and slightly moisten with water. In this form, leave the dishes for the whole night. In the morning it is necessary to remove the salt and clean the place of burning with a sponge.
- If the first method did not give results, then it is necessary to make a special solution with a large addition of soda, pour the dishes, heat and boil. After the dishes should be left with the liquid until the morning. Further burner can be removed with a wooden spatula.
- Vinegar will help to cope with a strong soot. It is necessary to prepare a solution: take 1 liter of water, 3 tbsp. tablespoons of vinegar and 50 grams of soda ash. Dish should be poured over the cooked solution and boiled for about 15 minutes. After that, the liquid should be immediately drained and thoroughly clean the burnt surface. All actions must be done quickly, because vinegar has a negative effect on the enamel.
- An excellent method is the thick of brewed natural coffee. To clean the dishes should cover the bottom of the product warm and thick and leave for half a day. Then the bottom of the product should be thoroughly cleaned with a sponge, rinsed under water.
- You can remove burnt food with a regular onion. It should be cut and placed in a burnt product, covered with water and heated over a fire. In order to better remove carbon deposits from the walls, one should apply boiling and then wait for complete cooling. Then you can proceed to the usual cleaning of the product.
- A good remedy is the use of potato peel, peeling apples or lemon acid. It is necessary to fill one of the ingredients with water and boil for about 30 minutes.
- The famous Coca-Cola will cope with the remnants of burnt food quite easily. The bottom of the need to pour a drink and leave for several hours. For greater efficiency, you can additionally apply boiling over low heat.
- Even ordinary ash will help fix the problem. It is necessary to make a mushy product by mixing the ashes with water. It must be applied all over the bottom of the product and left for one hour. Then add water and boil for another hour. An alternative to ash is activated carbon.
- To eliminate the yellow coating from the enamel coating, you can use tooth powder. It must be mixed with water to form a thick mixture. Alternatively, you can also use toothpaste.
Wash glassware
To clean glassware from burnt food, it is necessary to use the same methods as when washing Teflon or ceramic dishes. The glass pan can be easily cleaned with soda, vinegar, soap solution or coffee grounds.
It is forbidden to use harsh measures, for example, heating with a blowtorch.
Remove the cinder from the ceramic pan
Most housewives use ceramic dishes due to its ease of use, as well as the ability to prepare healthy and healthy food. In a ceramic saucepan, even when cooked, the healthy properties of food remain.
If the food burned to the bottom of the ceramic pan, you must perform the following steps:
- Pour the dishes with water at room temperature.
- Take one bar of soap and rub it on a grater.
- Add soap and soda ash to the water.
- All components must be thoroughly mixed until dissolved.
- It is necessary to put the pot on the fire, bring to a boil and simmer for about three or four hours on a small fire.
- Next, the solution should be drained and rinsed with hot water, additionally using a sponge.
- Wipe dry with a soft towel.
In order to prevent the formation of burning on ceramic dishes, you should use a proven tool. The procedure should be carried out before the first use of the product. First, rinse the pan under running water and wipe dry. Serve 5 tablespoons. spoons of salt and put on a small fire for about 15 minutes. Then remove the product from the heat, remove the salt and leave to cool. After wiping with a damp cloth to remove salt residue.
Folk councils
Modern manufacturers of household chemicals offer a wide range of household chemicals to eliminate various kinds of pollution, including the removal of burnt food from the walls of the pan. But do not give up folk methods. They are already tested by time and are safe for health.
Folk tricks:
- To make the pot shine, you can use a small piece of raw potatoes. A more effective solution is vinegar.
- Eliminate stains from water will help acetic acid. It is enough to dip the product in the vinegar solution for 15 minutes and rinse with water.
- To get rid of stains allows a combination of toothpaste and ammonia. These components should be thoroughly mixed to form a thick paste. Then the tool must be applied to the spots and rub a little with a sponge. After cleaning the surface is washed under water.
- The use of clay will help the aluminum pan to acquire its original luster. It is necessary to rub the surface.
Often with everyday boiling of water, scale builds up on the walls of the pan. Citric acid is ideal for its elimination. It can be used for different types of dishes.
It should be in a container pour out a bag of citric acid and pour water, bring to a boil and boil for half an hour. Next, you need to drain the water and using a sponge to eliminate the plaque. It remains to rinse the pan and it will look like new.
Effective to eliminate plaque and burn is a drink Coca-Cola. To clean minor dirt, you can pour the drink into the container and leave it for one hour. To remove a strong deposit, the pan must be boiled for another half an hour.
For information on how to quickly and effectively wash a burnt pan, see the next video.