How to wash the shower?

Shower cabins are used almost everywhere. But these useful elements of life can be greatly impaired by rapid pollution. Therefore, it is very important to know how to deal with them effectively.

It is obvious that the main pollutant is all the dirt that is washed off in the process of showering. No less serious source of dirt is water itself, because droplets of dust and so on settle down in its droplets. After the liquid evaporates, mineral salts and other solutes remain on the surfaces.

All sorts of shower gels, soap, shampoo, other cosmetics also fall on the surface of the glass and on the trays. The common between the various types of dirt is that In the old-fashioned form, they are washed away very, very badly.

Shower cabins contain a variety of materials, and therefore each part must be individually selected. cleaning products:

• So, acrylic trays should be washed and cleaned differently than those made from natural stone or ceramics. It is not recommended to conduct experiments and use household chemicals unknown to you. Yes, and also known, if there is no certainty that they are suitable in a particular case. Never use to clean the shower all that contains abrasives, strong acids or alkali. It is not even necessary to buy something, a good result can be achieved with natural means, it is only necessary to thoroughly study their features.

• Covered with limescale deposits need to pour from the spray mixture cups of kitchen vinegar and 500 grams of water. After processing, wait fifteen minutes and wash the surface with water, then wipe it until the slightest amount of water disappears.
• Chrome wipe parts lemon slice. Flush juice is not required.

• Dense pollution often occurs on shower heads. In this case, they should be put into the mixture. vinegar with water (components are taken in equal proportions) and leave for 8-10 hours. You can either disassemble the watering can on the parts, or put on top of it a bag with a solution, the neck of which is tightly tied. Do all the work only in rubber gloves! This method of cleaning will return the chrome finish to the original shine and, moreover, will reduce the susceptibility to new pollution.

• Using folk remedies, it is easy to get rid of acrylic and enameled plumbing from lime scale. Minor reservoir is enough toothpaste with an exposure of two or three minutes, then the product is washed off with moderately hot water, and the result is achieved.
• Good use and citric acid - in a glass of warm water, dissolve a tablespoon of the substance and add 20 grams of soda, mix the resulting mixture in a spray bottle. 10 minutes after application, you can rinse and enjoy cleanliness.

• Bay in the same spray concentrated vinegar, spray it over the rusty surface, and after 30 minutes the dark rust stains will easily wash off.
• And with lime spots, and with fresh mold successfully fights baking soda. She needs to fill the right place for 30 minutes, then rub in with a sponge, add hydrogen peroxide and leave to dry.

• Ethyl alcohol or vodka perfectly remove soap spray: one part of the alcohol is mixed with two parts of water. This improvised tool can be used for glasses and chrome parts.
• It often helps ... Coca Cola: it removes lime and rust and mineral deposits. After keeping the drink in the right place for 30 minutes, pour it abundantly with warm water from the shower.

Properly wash the glass portion of the hydrobox is not so difficult. For this purpose, all those tools that you used to use for cleaning windows and mirror surfaces are suitable. The selected composition is sprayed on the glass, leave for some time, then wipe with no additional watering.

The simplest cleaning agent that helps to bring the glass shower cabins in order, you can prepare your own hands. It will take a combination 200 ml of water and 5 drops of ammonia, their mixture well manifests itself when it is necessary to clean the doors, without leaving a single divorce.

When all the lines are straight and the walls are smooth, it is worth using a scraper to care for the glass; One of the sides of this tool is made in the form of a sponge, and the other in the form of a dense flexible rubber that removes all liquid and prevents the slightest stains.

Wash the mirror in the bathroom, as well as the glass structures of the shower stall, as carefully as possible. It makes no difference whether you use tools made from factories or made from improvised components, they all actively evaporate. As a result, you may experience sudden poisoning, if the concentration of the active substance in a confined space would be critical.

It is recommended to apply any drug on the open door or leave one of the twin wings open. If you can get to the inner surfaces of the shower door only when it is completely closed, you cannot spray the composition directly onto the sash! In such cases, it is poured on napkins or sponges, with which they work inside.

At home to get rid of soap bloom will help dishwashing liquid. If you rinse the surface, always make it hot first, and only then with cold water, in no case should you do the opposite. Do not forget to wipe everything up to complete dryness with a soft cloth.

Quickly wash the pan and do not harm him only through careful selection of a cleaning agent. Acrylics can only be treated with special compounds that bleach the coating, but do not have an abrasive effect. Friction microparticles, opening a porous structure, provoke an accelerated accumulation of pollution.

Remove small stains that remain even with thorough rinsing with water, you can use toothpaste with whitening ingredients. To do this, you need to take old toothbrushes with soft hairs, but in any case, do not use stiff bristles. Pasta must be white. Under the action of dyes, included in its colored varieties, acrylic can be irreversibly disfigured.

In case of clogging of the entire pallet or its significant part, specialized reagents will be much more efficient and more economical.

Artificial stone constructions can be cleaned with cleaning products in toilets. Note that they will have to be washed off with a significant amount of water. Before you start, be sure to wear strong rubber gloves that do not have a single hole.

Natural stone care does not require the use of special preparations., grabs one water and a sponge. To conduct an active cleaning, use a steam cleaner that can soften any spots, crusts and deposits. Then they are simply removed with microfiber cloths.

Plastic pallets need to be washed as often as possible so that they darken less frequently over time. Polyurethane scrapers, synthetic sponges and soft rags based on non-woven fabric are used for work. The enamelled tray is easy to clean with gels, sprays or powders, but it is still desirable that the abrasive effect is not too significant. Tiles can also be washed with what is more convenient and easier for you.

Near drains, taps and sprayers requires the use of the most dense detergent with a paste or cream consistency. Apply a solid layer of the drug on the problem area, wait as long as it is written in the instructions, and rinse well. This solution will save the surface of the crane not only from lime deposits or traces of corrosion, but even from the most resistant mold. Chrome steel is required to wash lemon juice or rub off with toothpaste, it will help and remove dirt and achieve the perfect shine.

It often happens that the surface is clean, the tray shines white, but the water still goes bad or lingers long. Even constant monitoring and careful cleaning do not guarantee that the drain will always work perfectly. A lot of hair, fine dirt fall into the pipe, and keep track of all this is simply unrealistic. But you can do prevention and avoid many troubles.

In case of difficulties with plums, find out if they only arose from you or affected neighbors in the entrance. Do not try to solve a common problem on your own, rather call a plumber. The blockage in the nearest pipe can be removed with homemade pasta, which includes soda and vinegar in equal proportions. Pour them into the drain hole, seal it tightly for two hours, and then pour it with hot water. To increase the activity of the tool will help a small portion of salt.

If neither the paste nor the cleaning with a plunger helped, it's time to use plumbing cable. You will definitely need an assistant. After inserting the cable into the hole, push it in, while someone else must twist the tool around its axis. Then they pull the cable back and forth several times, and then turn on the hot water at full capacity.

As for household chemicals, it is not a good idea to use it to clean up blockages in the depths of pipes. It is worth saving for later, when all other ways to destroy the blockage on their own did not work. Try to choose a tool that has the most gentle composition, it is necessary for your health, and for the sewer pipe. Never exceed the prescribed dosage and duration of use!

Mold colonies are bad because they are embedded in the structure of any porous material, and if already ingrained, it is almost impossible to finally remove the fungus, at least at home. That is why care should be taken to prevent damage to the shower cubicle by mold: forced ventilation is used in the bathroom, airing the room regularly and wiping it dry. When washing the cabin, pay attention to the sealed joints or seams between the tiles, that is where black mold always appears. It is recommended once every six weeks to carry out intensive cleaning of joints with the application of bleach containing chlorine.

If, nevertheless, the appearance of a fungal colony could not be avoided, it remains only to restrain its development. With the current cleaning, remove any black spot that you see immediately.Lesions are treated with special solutions with an exposure time of 90 minutes. Then remove the dirt using a sponge.

From improvised means, a mixture of ¼ cup of soda, ½ cup of vinegar and ½ cup of sal ammoniac is capable of harming the fungus. A soft sponge is immersed in the solution, and already with its help all surfaces, first of all, the walls and the lesions of the mold are coated. Please note that the smell of this product is very strong, and it can be toxic, so do the cleaning when the windows and doors are wide open or with the exhaust fan on.

Specialists of cleaning firms and professional cleaners of organizations know “one big secret - it’s not so important what washing a shower cabin is like regular processing:

• Care should be daily, after each use, the hydrobox is cleaned and washed, and, if necessary, washed as intensively as possible. Make it a rule: as soon as they took a shower, they immediately wiped dry any surface. In doing so, you will repeatedly reduce the risk of persistent plaque.
• Do not use potent drugs, both specially designed for cleaning and improvised means, every day. After all, it can have a detrimental effect on your health and on the state of plumbing equipment.
• When the surface is thoroughly cleaned with a monthly maintenance, wait for it to dry and apply hydrophobic agents, they will help reduce the accumulation of dirt in the future. If there are splashes of toothpaste, if soap and shampoo, shaving foam and other cosmetic and hygiene products are found somewhere, remove them immediately. It is easier to maintain order and cleanliness in the bathroom.
• When cleaning painted aluminum, never use abrasive compounds, otherwise you will not be able to vouch for the integrity of the paint layer. Plastic cabins can be cleaned with acrylic bath products, and glass cabins with window care products. Even the most versatile and gentle powders are undesirable.
• It is necessary to clean the drain from clogging no sooner than all the water escapes from it. It is better to wait for the extra twenty minutes than to complicate your work. Sometimes the problem is solved by removing the drain plug and the grid, after which you can remove the lump of dirt by hand, a short stick or a metal rod. Accurately find out how deep the blockage is, the flashlight will help you.

How easy it is to get rid of lime and other contaminants, see the next video.