How to wash the shower cabin from lime?

Today, many people in their own bathrooms prefer to install showers, rather than annoying bathtubs. If you look, then it makes sense. The shower booth significantly saves water. It also reduces the time a modern person spends on his own hygiene. Wash the bath is easy, and everyone knows how to do it. With a booth, everything is a little more complicated.

This design consists of different parts made of various materials:

1. The walls. As a rule, these parts are made of glass;
2. Pens. Chromium is used for their manufacture;
3. Pallet. Most often made of acrylic.

From this it turns out that for each material you will need to choose your own cleaning agent. Do not forget that all surfaces must be cleaned carefully, so as not to leave scratches or chips on them. In more detail about high-quality cleaning of a booth we will talk further.

As mentioned earlier, the main difficulty of cleaning is the complicated construction of the shower stall. It must be cleaned all, starting with the pallet and paying attention to the nozzle. Sometimes it is not quite easy to do this, as it may seem at first glance. But you shouldn’t bother too much either, because you can always find the most optimal variant that you will like.

If you systematically do not clean the walls of the shower stall, as well as the acrylic tray and chrome faucets, as well as other parts of this (rather complicated) construction, you will soon discover that cleaning it at home is difficult and sometimes impossible. .

That is why you should pay close attention to this issue.

First of all, you need to know that all the booths are really diverse and it depends only on you what your model will be. Produced designs that have 4 walls of glass. They are also sometimes made of plastic. Other options may simply be located near the wall. That is why 2 out of 4 walls will be tiled. It is necessary to figure out exactly what surfaces you will need to clean and how to wash the shower booth. So you speed up your work.

In addition, you need to know that the bathroom is the warmest place in which high humidity remains. It is in this room that black mold can form. It, of course, thoroughly spoils the appearance of the structure, and is also dangerous to the health of all family members. In order to prevent its spread, it is necessary to very carefully observe the order in the bathroom, and after taking a shower, you need to air the room and the cabin. The procedure should last at least two hours.

For quality work, you need to do everything on time, thoroughly and carefully. If you regularly and properly cleaned, the shower will shine. And if you always and in all respect the rules of caring for such an important thing, in time to remove the resulting dirt, plaque and mold, then you can avoid many health problems.

First you need to pay attention to the doors and walls. They can be glass or plastic. Glass is quite resistant to the use of household chemicals, so the choice of quality products to care for it is very wide.

Cleaning of plastic walls should be done as often as possible., because the structure of plastic is such that it is covered with bloom faster. You should use polyurethane scraper and sponge, microfiber, special care products.

If the cabin fits snugly to the wall of tiles, then in the next step it is necessary to thoroughly wash it. In the store you can buy a lot of tools for the purification of ceramic coatings. Many of them will do, because the tile is unpretentious. It easily transfers acid-base medium and abrasives. Choosing a tile for the walls, it is better to stop at the glossy one, because there will be much less opportunity for the accumulation of dirt and microbes on it.

The next step will be the cleaning of all products from chrome-plated metal, from which taps, showers, mixers and various accessories are often made. On them, lime deposits form quickly, having an unattractive appearance. In this case, it is necessary to abandon the abrasives and use more gentle means, because such metal is easy to scratch. You can spoil the expensive thing.

You need to be very careful when cleaning painted or laminated aluminum. Careful handling and the right choice of tools will increase the service life of plumbing.

It is necessary to pay as much attention as possible to the pallet, because all the pollution flows there, and during bathing it becomes barefoot. This means that it is necessary to take care that it is perfectly clean. Especially often on the walls of the pan appears mold. Remove it immediately.

Care of the pallet depends largely on what material it is made of. Acrylic trays can be easily scratched. They are subject to erosion and can be deformed, so you need to be careful when choosing cleaning products. Enamelled surfaces are resistant, but special substances should be purchased for them. For cleaning ceramics use the same tools as for tiles. But stone pallets are the least whimsical and very easy to clean.

If you follow these simple rules, take a responsible approach to the choice of detergents and cleaning products, you can always keep the shower stall clean and extend its service life for many years.

Before you spend money on expensive household chemical goods, take a look at safe and more natural folk methods. The superiority of this method in comparison with chemistry, including their environmental friendliness, is that they do not require large expenditures and some of the necessary components are almost always found in the house.

Not bad removes rust and plaque citric acid. To cleanse the shower with acid or lemon juice You need to make a special solution for this recipe:

• dilute a bag of acid or lemon juice in a half glass of water;
• pour the solution into the spray bottle;
• evenly spray the entire cabin surface.

After softening the dirt for 10 minutes, rinse it all off with cool water. If, after these actions, the deposit still remains, then it is necessary to increase the proportions of the acid solution and add a couple of lemons or a whole package of acid to the same amount of water.

An effective means of cleaning the surface, is tooth powder.

It is easy enough to process the surface: just apply the product to problem areas and rub it with loofah. For difficult dirt, apply the paste and leave it for a while, and then remove with a sponge.

This pair perfectly copes with the newly appeared mold in the corners of the cabin and with a patina. You should sprinkle the contaminated area with soda and wait half an hour. Then you need to rub this area with a sponge, pour peroxide on the soda and leave to dry.

To clean the shower from all types of plaque with vinegar, dissolve it in water at a ratio of 1: 1. Fill the treated area with the composition for half an hour, then rinse everything with cold water.

Brilliantly removes soapy stains.

For a recipe for old mud, you will need a mixture of half a cup of ammonia, 2 liters of water and a tablespoon of soda and vinegar.

In the cleaning of glass surfaces from limescale the most effective ethyl alcohol. For the cleaning composition you need dilute vodka or alcohol with water in a ratio of 1: 2. In addition to glass, this solution perfectly cleans also chrome-plated devices.

This carbonated drink has long been known as a folk remedy that is effective in removing lime and rust. To clean the shower surface, it is required to pour the treated area with cola, wait half an hour and thoroughly rinse everything with cool water.

To clear a limy raid absolutely easily recommended folk remedies. Such solutions will cost you much cheaper and will be quite effective.

For information on how to achieve crystal clarity and whiteness in a shower cabin in 5 minutes, see below.