How to clean the washing machine?

Today, almost every city dweller has an automatic washing machine. This is a convenient assistant for both women and men. During the crisis, it is very important that the washing machine lasts as long as possible, because the prices of new appliances in the shops bite. What activities need to do this - consider in this article.

The main cause of pollution experts call water. It is not a secret for anyone that by its physical indicators it is tough. It may contain elements that are deposited during the washing process inside the washing machine. This leads to premature damage to the product.

But the things themselves, or rather, their particles can be harmful. At high speeds during washing, the material is destroyed, its fibers, which are almost invisible to the eye, settle in the filter grids, they are clogged, due to which water cannot escape without hindrance.

When using cheap and low-quality laundry detergents, the drum can be put out of action, since a white color remains on it. By the way, this soap bloom may begin to rot - and this is again a source of unpleasant odor.

In this regard, there are three types of pollution that automatic washing machines encounter:

1. Scum. This may also include limescale. These two misfortunes occur due to the poor quality of running water and salts of trace elements such as calcium and magnesium. Scale negatively affects the work of the product, contributes to an increase in energy consumption. If you do not look inside the washing machine for a long time, then you can say goodbye to it. Cope with these problems household chemicals and folk remedies.
2. Mold. Dirt and small debris are clogged in the internal parts of the washing machine, and therefore there is an unpleasant smell and minor damage.
3. Contamination of the case, including the glass door. Detergents will help to cope with the pollution of plastic or glass.

As mentioned earlier, you can wash the washing machine inside and out with household chemicals or folk remedies. In any hardware store you can find a special series of detergents for automatic machines. They differ in cost and composition.

Whiteness should be used with great care. It is a strong chlorine-based chemical that can adversely affect the product.

Soda can independently get rid of mold. Mold usually appears on the drum and in the tray where the detergent is poured. There are frequent cases of mold under the rubber, which is located in the area of ​​the glass door.

Peeling off an automatic machine helps lemon acid. A bag of acid, unlike household chemicals, is always on hand at any hostess.Provided that citric acid is cleaned and household electric kettles from scale, it can be concluded that it is safe for human health.

Black mold can be used vinegar. But at the same time, it should be remembered that acetic essence has a peculiar smell, which can not disappear for a long time, the smell can remain on things.

Scrub the car from the mold can copper sulphate. It can be found in any gardening shop. With this blue powder, gardeners treat trees and shrubs every spring and autumn for fungal diseases.

You can remove dirt from the plastic case with soap solution. To do this, just take the laundry soap and grate it. The resulting remnants flooded with warm water.

Virtually any automatic washing machine has weak spots that are most often contaminated. This is due to the technical features of the product. But household chemicals, with which washing is performed, can have a negative effect. These are the most "suffering" places.

At one point, households can feel a peculiar smell, something resembling a marsh. It smells like black mold, which is formed if the hostess washes her clothes at a low temperature, as a rule about 40 degrees and below.

Plaque, something resembling mucus, settles on the rubber. And if you also close the glass door tightly, without thereby airing the drum, then this is the most favorable environment for mold.

If the plaque is invisible without a magnifying glass, then this does not mean that there is no mold. In order to accurately answer this question, it is enough to take a clean cloth or napkin and walk along the inner wall of the compactor, on the material should not be anything suspicious.

Suppose that a black patina has already formed, but perhaps it still does not make itself felt - there is no sharp unpleasant smell. In this case, it is necessary to prepare a cleaning agent - it can be household chemicals or folk remedies.

Rubber in the drum can be effectively cleaned with such publicized and well-known means as "Whiteness" and Domestos or any other cleaning agent for plumbing, which contains chlorine. To do this, use the instructions and an ordinary toothbrush. Applying a chemical agent on the rubber gasket, it remains only to walk with a brush clockwise or counterclockwise. In advanced cases to be “Bathe” the rubberized part in bleach, then wait for some time until the spots disappear. Usually this procedure takes up to two hours. If these funds are not at home, then from folk remedies mistresses recommend copper sulphate or soda.

Copper sulfate is sold in stores in packs of 100 grams. 1/3 packs of fungicide and four glasses of water are poured into a small container. The powder must be completely dissolved in water. Rubberized parts of an automatic washing machine are treated with a solution.

Soda is diluted in a special container. To do this, it poured water in an amount of 125 ml and soda poured as much. If you translate into a well-known language, it is about half a glass. The resulting consistency is processed seal, washing the substance is carried out in rinsing mode.

The powder tray, or, as it is also called by the master, - the hopper for the dispenser, is also periodically contaminated. First of all, it can form mold. After all, it is from this compartment that the water washes away the powder, which means that Humidity in this place is increased. And for moldy mushrooms another happiness is not necessary.

It is not necessary to shift the responsibility to someone else, unfortunately, the household itself is to blame for the appearance of mold. After all, for the appearance of the fungus, only certain circumstances, such as a cold wash, neglect of whitening ingredients, improper rinsing and dampness, are sufficient.

Almost any person at least once in his life washed at a low temperature for a short period. This allows you to finish the wash in a short time and go about your business. Without knowing it, people do not start the disinfectant mode.

In cheap powders may be missing the necessary components, including whitening particles. They act on both things and fungal colonies. The desire to save, of course, is understandable, but if you use an ordinary powder, and not a universal one, then you need to buy a special tool, in this case it’s not always possible to win money. Otherwise, cleaning of the tray and other parts of the mold is already ahead.

It is very important not to forget that When using a rinse aid, you need to activate a special mode. Without this, the fabric softener stays on the details of the automatic washing machine in the form of non-flushed mucus. And if you still do not wipe after the tray, the mold is guaranteed.

Mold is not just dirt that sticks to the compactor, the tray, or to the drum. If the family has allergies or small children, then this attack can adversely affect their health. After all, mold can be ignored for many years and periodically go to the hospital. Allergies are still flowers, and if they are not treated, it is possible to “achieve” diseases of the respiratory tract or throat and weaken the immune system.

If the automatic machine is not of "pre-retirement age", then you can try to fill it in the bunker for cleaning vinegar and soda in proportions 2: 1. A pound of soda will take about a liter of vinegar. It will remain to start idle washing, but remember that this may adversely affect the typewriter and its details.

Knowing the reasons for the appearance of mold, you need to act in a complex, and then the result will be one hundred percent. From gentle methods, you can offer to pour a bottle of whiteness into the tray, set the maximum temperature and start a long wash. After half of the washing is over, the machine must be stopped. Rest should last about two hours. Then you need to continue washing.

Before rinsing, pour half a liter of acetic essence into the tray and finish the job. After all the procedures, all visible parts of the washing machine will be cleaned with a dry cloth. Airing occurs when the glass door is open. Experts recommend keep it open for at least two days but for many it becomes a habit and they no longer close it.

If there is no mold under the cuff, but there is already a smell, then citric acid helps to get rid of the swamp smell. Wash with it preferably at least twice a year. To do this, thoroughly rinse and dry the dosing hopper.If we consider that usually in the package of citric acid about 30 grams, you will need to pour seven packs. You need to set the maximum temperature and the longest wash mode. After completion, it should be dried and ventilated.

If the fungus has already appeared in the form of black spots, you can use soda. The recipe for its dilution has already been presented earlier, the same solution can be used to process not only the seals, but also the tray and the drum.

Unfortunately, folk remedies do not always help to clean the parts of an automatic washing machine. In order to save money, you can use a toilet bowl cleaner. It is not a secret for anyone that, as a rule, the same substances in the composition of household chemicals differ only in dyes and fragrances. And from this it follows that spending your money is inappropriate.

It is not necessary to erase with this tool, it is enough to apply the substance with a sponge to wash dishes on the places where there are supposedly fungal colonies. Do not forget about personal protective equipment - gloves and respirators. The active substance will cope with the task in ten minutes. After that, you need to remove the remnants of the substance and run the idle wash. To fix the result, do not forget to include rinsing. remember, that Baking soda can dissolve the remaining particles of an aggressive detergent.

It would seem that the automatic washing machine was specifically designed to clean things from contamination, and its very need to be periodically cleaned. Often during the washing the housewives are faced with such a situation that the water at the right time does not merge. A suspicious sound is heard, which is not typical of the automatic machine. These are the first signs indicating that the drain pump is either clogged or broken.

The drain pump is cleaned with a wrench and screwdrivers. Do not be afraid, because as such, repairs will not be made, the whole point is that the pump is inside the washing machine, so you need to get to it.

In most cases, this part is located at the bottom of the product. It is protected either by a small door or by a special lining, which can be opened with an ordinary screwdriver. The door can be opened by simply lowering, raising or turning it, it depends on the model.

The detail keeps on the self-tapping screw, it is possible to “release” it, having unscrewed a hardware. To do this, use a Phillips screwdriver. remember, that screw can rust, and therefore, it must be twisted gently, so as not to disrupt the thread.

Very important at this moment to put unnecessary rags under the washing machine, towels or sheets and prepare a special water tank. It is desirable that it be wide, not high. What material it will be made from - plastic, metal or glass - it does not matter.

The automatic machine needs to be inclined and to substitute a container for it. It is better to perform this operation together, the second person at this time should unscrew the cover. The accumulated water should begin to flow unhindered.

Putting the washing machine on its side, in the same way unscrew the pump directly. Then unscrew the wires and remove the holders with tubes.

Now you can clean the drain from the blockage. This task can handle any household chemicals. A soap solution can be recommended from cheap products, it is prepared from household soap, or rather, from remnants. They are poured with water. Applying a cleaning agent on a cloth, gently cleaned sump.

In some models of washing machines access to the drain pump is difficult.First of all, you will need to pull out the tray, a screw appears that you need to unscrew. After this, the lower part is removed and the next screw is unscrewed. This will release the panel to be removed. Under it will be located the remaining screws. Further actions will be directed to the dismantling of the collar and cuff. Having passed all these stages, it will be possible to remove the front part of the body, and already under it there will be a compartment with a drain pump.

There are washing machines, drain pump which is located in the rear. So, you should remove the drain hose and unscrew the back cover. These products still have to disable the terminals. The drain pump is unscrewed with an ordinary wrench, it will be necessary only to disconnect the tubes and clean them.

Clean the impeller directly - a detail that is somewhat similar to a fan. The part is reliably protected by two halves of the case, which are fastened together with screws, and then they have to be unscrewed. After this, access to the impeller will appear. It can be wound hair, pet hair. There are frequent cases of winding synthetic or natural yarns. All these surpluses need to be carefully removed, no need to forget about cleaning the snail.

Now you need to install the pump in its place and connect the part according to the instructions. If done correctly, then there will be no extraneous noise. Water will naturally flow into the sewer. Otherwise, you need to replace the drain pump.

To avoid damage, replace the washing powder and clean the filter regularly. In addition, you can use a special mesh for washing things, install additional filters for water treatment.

Divorces or various contaminants may remain on the glass door of an automatic washing machine. And if we take into account the fact that the automatic machine can be installed in the kitchen, then the hatch is the front part. And this front part, of course, must always be clean.

To clean the glass part and the plastic frame, it is enough to use non-aggressive cleaning products. Soft household chemicals in a small amount applied to a clean cloth.

With regards to the remaining parts, their cleaning occurs in most cases in automatic mode. It is enough to add the previously mentioned detergents and cleaning products to the water intake and start the idle wash. Water, falling into a cuvette, will spread - in a good sense of the word, all cleaning agents in all details. And all the garbage and pollution will go straight to the pipe.

A vertical washing machine, like a horizontal automatic machine, “becomes infected” with the same “diseases”. Scale may form on the heating element, and if you do not ventilate the car inside, then there is mold and an unpleasant smell.

In order to clean all the details at once and cope with all the “diseases”, it will be necessary to pour half a liter of acetic essence into the water. The temperature at the same time should be the maximum. Within a few minutes, the water mixes the vinegar completely, after which you will need to add a few tablespoons of soda. Enough three spoons without a slide. Alkali with acid will react. To complete the process safely, turn off the washing machine. Usually this stage takes about an hour.

To avoid wasting time while the internal organs are being cleaned, the product can be cleaned outside.To do this, combine the water with vinegar in equal proportions and process the plastic with this solution. Be sure to process and tray.

After an hour, you need to resume washing, wait until the water is drained and dry with a cloth or sponge to wipe the inside of the washing machine.

First of all, you need to understand that the reasons for the smell can be several. An unpleasant odor may be caused by mold, blockages or dirt. Often there are cases when the smell appeared from stagnation of water and residues of washing powder.

Mold smells damp and vice versa. In a washing machine, almost all parts are washed with water, and if no draining is done, a favorable environment for the reproduction of bacteria and moldy fungi appears. When washing at least once a week, the dirt and residual powder gets mildew as food. Mushrooms occupy the powder bin, drum, compactor, pump and drain.

To get rid of a colony of mushrooms, it is enough to wash the car idly with the use of whiteness or using the people's councils.

If there is a clogging of drains, the smell of sewage will surely appear. Dirt, particles of things, the remains of powder, gathered together, begin to fade. Everything else they contribute to the occurrence of stagnant water. To get rid of this smell, you will need cleaning of hoses either mechanically or using household chemicals.

Often on the drum itself there are particles of cloth, dirt and detergents. After the next wash, they interact with water, and if at the same time close the glass door tightly, the process of rotting will begin. After a while there will be a smell. If households practice storing dirty things in a washing machine, this smell will automatically switch to clothes. It will be difficult to get rid of it.

Unpleasant smell can appear only at the time of draining. This indicates that the blockage has affected either the drain filter or the drain hose. Dirt, pile, mucus from the powder - all this eventually settles on the walls of the hose and in the filter compartments. In order to prevent specialists recommend clean these parts at least twice a year.

The reasons for an unpleasant smell can be not only breakages, but also low-quality laundry detergent. Cheap means also spoil the heating element, leaving behind scum, and various parts - a compactor, a powder tray or a drum. On the auxiliary parts, they settle in the form of a raid. This plaque accumulates and becomes a favorable environment for microorganisms and fungi. And they, in turn, begin to "eat" these remnants, as a result of which an unpleasant smell arises. It is necessary to select washing powder and air conditioning until an optimal variant is found that does not lead to the release of odors and will be affordable for the consumer.

If the mold has already appeared in the tray, with a high degree of probability it began to spread and deeper. Pull out the tray and check if there is mold in the feed channel. If this is not done, the smell will not disappear. To clean the channel may require a plunger or a brush.

All models of automatic washing machines are equipped with a protective filter. It is designed to filter water when drained into the sewer. It is not surprising that a part that takes all the pollution on itself may eventually fail.

The hose at the washing machine can be clogged, as well as the corrugation at the sink. On its wall is attached dirt, powder residues, mucus is an excellent medium for the reproduction of microorganisms. This leads to unpleasant aromas. Intermittent washing can correct the situation.if this does not happen, then you have to replace the drain hose.

There are often cases when the plastic turns yellow under the action of particles of dust and dirt. It is very important that the contamination does not start to interact with the plastic case. In this case, it can be removed using household chemicals and a sponge. But if plastic is cheap, then mechanical actions with its surface can lead to deep scratches.

Outside, you can clean the washing machine with ethyl alcohol or methyl alcohol. But remember that methyl is a poison that can destroy even an adult healthy man. Therefore, the process should be carried out in protective equipment, and the room should be ventilated.

In the shops selling household appliances, you can find special wipes. They incorporate the bleaching components. And in stores where automotive parts are sold, you can find special sprays. If you buy a cleaner, they can not only clean, but also apply a protective layer.

Acetone is processed yellowed plastic in the most neglected cases. Besides the fact that acetone has an unpleasant smell, it can also spoil the appearance of household appliances. It is enough to apply this tool in a small amount on a cotton pad and carry out a test cleaning. When a satisfactory result is achieved, the entire surface should be cleaned.

In the building stores you can find self-adhesive white wallpaperThey usually restore the surface of plastic window sills, but they can also be used for washing machines.

Another way to get rid of yellowness is paint in cans. But it should be applied last, since there is a high probability that particles of paint will get into the interior of the washing machine, which may lead to breakdown of household appliances.

Do not forget to wipe the inside of the machine after each wash. First of all, the seal, because it is there that black mold appears. On the drum may remain particles of powder and dirt, which ultimately contribute to the occurrence of an unpleasant smell.

The dispenser tray must be dried and thoroughly treated with detergents. The glass door must be open for at least two days. - airing eliminates the likelihood of an amber.

The drum should ideally be empty. remember, that keep dirty things in it is undesirable, after washing, it is required to free the washing machine from things as soon as possible and let it dry.

It is necessary to add washing powder and rinse according to the instructions, the option “more - better” does not work in this case. Excess powder is not washed away, but settles on the walls of the product.

At least once every two months, idle washing should be started, and running with citric acid should be performed twice a year. This helps to clean the washing machine not only from scale, but also from moldy mushrooms.

How to clean the washing machine from the mold, see the following video.