How to clean the washing machine from scale with citric acid?

That the washing machine served without complaints, it is necessary to look after it and to make cleaning of the equipment. In practice, there are various options for care, but many hostesses choose traditional methods. If you are looking for information on how to clean a washing machine from scale with citric acid, this article will help you find the answer to your question.

Before cleaning the washing machine, make sure that these actions are necessary. You should also understand what kind of detail in the equipment should be cleaned. If you inspect the inside of the machine, which worked for a long time without cleaning, you can notice a dirty coating on the parts. As a rule, it has a solid structure, so you cannot remove it with a simple cloth.

The main reason for the accumulation of scale lies in a large number of calcined salt and magnesium, which dissolve in water and settle in the form of scale on PETN. Elements of rust and mud deposits also have a direct impact on the appearance of plaque.

Washing machines can accumulate dirt, mold and scale in several places:

• mold fungi tend to accumulate in the cuffs. Such a union leads to the formation of unpleasant odors;
• scaling forms on the heating elements;
• powders, fabric softeners and other additives accumulate in the inside of the machine;
• dirt, small objects often remain in the pump filter;
• rust elements, sand, usually remain in the area of ​​the inlet hose.

At the expense of such savings, after a while, you may find that your clothes are not as clean after washing, unlike previous washings. To prevent this, washing equipment should be cleaned of plaque and dirt formations once every three months. If you live with pets, or you wear clothes made of wool, such cleaning will be needed more often.

Scale contributes to the deterioration of the thermal conductivity of the metal. This leads to the fact that the machine spends much more time for heating water, increasing the consumption of electricity. When the water is heated, the salts in it react, disintegrating into two elements — carbon dioxide and insoluble sediment, which we call scum.

The raid settles on the walls of the tank and heating elements washing equipment. Dirt contributes to the wear of the intake valve, which makes it subsequently unsuitable for use. Masters who are engaged in repairing washing machines, report that a lot of garbage gets into the machine after repairing plumbing and turning off the water supply.

You have the opportunity at home to find out whether there is scum on the heating element of your device.

This method has the disadvantage that it is difficult to choose the speed of the buildup of the drum in order to evenly illuminate the heater.

To launder a washing machine, you need to clean the heating element itself, which is responsible for heating the water.If we neglect the procedure, the heating element will need to be replaced soon. Running high temperature programs increases the chances of plaque formation. Cleaning equipment can be done using tools that are sold in stores, or refer to the popular methods.

Widespread has received a special tool called "Antinakipin". The product contains acid, which promotes the dissolution of sediments. To use this method, you will need to turn on a special mode on your washing machine - "laundry without linen".

Experts recommend choosing the mode in which the wash lasts no more than one hour. The agent is poured into the laundry detergent section.

Before using this method, consider the possible consequences. Before filling the product into the machine, read the instructions, as an overabundance of powder can "eat" the rubber components. Also it is necessary to take into account the fact that acid fumes are quite harmful by inhalation. Despite these inconveniences, the tool has a low price and simple use.

If you decide to use this method, do not confuse "Antinakipin" with special softeners, which are added to the water with each wash. These products do not help to get rid of scale.

The essence of the action of the powder is similar to the work of citric acid, only it has a little more value. Also, the difference is that the substance was developed specifically to clean the dirt from the heating elements.

Many housewives do not want to resort to purchased products and trust the question of cleaning products that are in every home. Such methods are considered proven and reliable. Using household products that are always at hand will allow you to quickly and painlessly clean the heating element from scale.

In second place after the lemon is table vinegar and baking soda. These substances are used to eliminate many "accidents" in the house, including the cleaning of heating elements from scale. It is important to study in detail the instructions for using each of the products so as not to harm the typewriter.

To at home quickly return the typewriter proper form, you can use several ways. Study in detail the instructions to extend the life of the heating element.

How to remove scale with citric acid:

• This method is similar to the use of purchase tools. You will need to drive a typewriter in "idle" mode. Underwear for such a program is not required;
• in the compartment for washing powder, put 2-3 tablespoons of citric acid;
• choose the program with the highest temperature regime and long wash cycle. Typically, the highest temperature is 95 degrees;
• If you want to enhance the effect of the procedure, turn on the extra rinse. Such a solution will help to clean parts from small particles that may in the future become a source of unpleasant odor;
• The procedure is recommended to be repeated every six months. Citric acid is guaranteed to remove scale from the surface of the heating element, thereby reducing your energy costs and extending the life of the parts themselves;
• consider that the use of a large amount of citric acid will lead to the deterioration of rubber bands and the need for further repairs;
• wait a couple of hours, you can get rid of the problem. Such a procedure is simple and practically free of charge and returns the heater to its original, brilliant state.

How to clean the machine with vinegar:

• prepare two glasses of vinegar;
• pour the substance into the washing machine and add hot water;
• Wash should be done in “idle” mode. The use of powder and laundry is unacceptable;
• choose the longest wash cycle;
• five minutes after the start of the program, put the equipment on pause;
• after one hour you can continue the procedure. This method helps the cleaning solution to better penetrate all parts of the tank;
• To remove any residual vinegar from the equipment, repeat the wash procedure in the shortest cycle;
• using a cloth moistened with a weak acetic solution, wipe the door from the inside. Pay special attention to seals;
• according to experts, this method has the highest result.

Descaling with table soda and vinegar:

• Take 1 cup of 9% table vinegar, a quarter cup of table soda and a quarter cup of water. You will also need a stiff sponge;
• mix table soda with water and pour the mixture into the powder compartment;
• pour vinegar into the drum;
• enable idle mode with the longest cycle and highest temperature.

It is necessary to clean all elements of the washing machine, including the sealing gum.

Sealing gum loves to collect particles of dirt, mold, as well as the remnants of some things from the pockets of clothing. For this reason, it is recommended to periodically clean this part.

How to clean the cuff:

• buy any cleaner. You can use baking soda or "Pemolyuksom" and other substances. For running options that are accompanied by unpleasant odors, a stronger tool will be required. These include “Domestos”, “Komet”. Substances containing chlorine in their composition are prohibited, as they may spoil the gum itself;
• Using a sponge or cloth lubricated in the selected product, clean the hatch body. First you need to pull the cuff;
• the sealing gum itself is also cleaned in the same way;
• Remember that most dirt accumulates in the bottom of the hatch. Despite this, the whole circle should be cleaned;
• do not pull much gum, so as not to damage it;
• after the procedure, wipe the rubber with a damp cloth.

To prevent the occurrence of scale, the washing machine must provide proper care and preventive measures. There are physical or chemical methods that will help extend the life of the heating elements.

You will need to purchase a special magnetic device that is put on the water supply hose.

This method involves the use with each wash of purchased products that actively advertise different brands. However, you run the risk that descaling will damage delicate tissue. In addition to this risk, additives should always be used, and their cost is quite high.

The following rules should also be followed:

• Use only the required amount of powder and rinse aid. This will help you prevent the excess from settling inside the equipment;
• check your pockets before washing. Otherwise, small things left behind may clog the drain filter;
• get things out of the machine immediately after washing;
• do not leave dirty things for a long time in the drum;
• Leave the door open to prevent mold.

You can find out how to clean the washing machine with citric acid in the next video.